Table of Contents
Advertisement
2.6
Hardware Assembly Guide
This section details the steps to installing your device's drive (2.5" HDD or SSD), RAM
module, and Mini-Card modules (Half-Sized and Full-Sized mPCIe/mSATA cards). Be
sure to read instructions before assembly and ensure that you have the required parts
before proceeding. If you need any support or assistance, please contact your AAEON
representative, or visit the support page at AAEON.com to contact our team.
Before You Start
Before starting the assembly steps in this section, ensure the system is powered off
(not in sleep or standby mode) and the power cable/adapter is disconnected from the
system. Failure to do so can result in damage to the system and/or personal injury.
Parts List
Make sure you have the following parts before starting:
Item
GENESYS-APL7 System
SATA Cable
SATA Power Cable
HDD Screws
Zip ties
SODIMM RAM Module DDR3 1866 up to 8GB
mPCIe/mSATA Mini-Card (Full-Size)
2.5" Hard Disk Drive (HDD) or
Solid-State Drive (SSD) storage device
Chapter 2 – Hardware Information
Part Number
968MY00013
170X000058
170X000056
S1D3004031
1992666607
Quantity
1
1
1
3
3
1
2
1
25
Advertisement
Table of Contents
