Operating Positions; Removal; Installation; Micro-Opening - AGV Pista GP RR User Manual

3
2
1
1 2
8 8
4 Race3 VISOR
Polycarbonate with variable (4mm - 5mm)
thickness
Anti-scratch treatment on both sides
Optical quality class 1
Field of vision: 85° vertical; 190° horizontal
Double-engagement central button-type
locking mechanism with micro-opening
position and fastening adjustment
Inner surface moulded to accommodate the
Pinlock 120 anti-fog lens
®

4.1 OPERATING POSITIONS

1 Visor closed
2 Visor in micro-opening position (cfr. 4.4)
3 Visor open
When riding, it is always advisable to keep
the visor completely closed.
If the helmet is not used for a long time, it
is advisable to leave the visor in the mi-
cro-open position.

4.2 REMOVAL

Prerequisite: the visor is in the fully open position.
Start the operation on the right-hand side visor
mechanism.
Pull the spring catch slider (1; arrow) and
•
move the visor (2) away from the shell.
Repeat the operation on the visor mechanism
•
on the left side.
The visor is detached and removable.
→

4.3 INSTALLATION

Prerequisite: start the operation on the right-hand
side visor mechanism.
Pull out the spring catch slider (1).
•
Fasten the spring catch slider to the raising/
•
1
lowering bush (2).
Repeat the above operations on the left-hand
•
side visor mechanism.
The visor is now attached. Check that it is ro-
→
tating correctly.
2

4.4 MICRO-OPENING

A working position which, whilst keeping the
visor closed, creates a gap which allows for a
moderate influx of air into the helmet.
Prerequisite: the visor is open.
Lower the visor until the plastic hook (1) en-
→
gages the open button (2) at the first click.
Prerequisite: the visor is closed.
1
Press the open button (2) and, in a single ges-
→
ture, push the edge of the visor upwards until
the plastic hook (1) engages the open button
2
at the first click.
中文 中文 中文
If necessary, facilitate this engagement by
lightly pressing the open button (2).
EN
IT
FR
DE
ES
PT
РУ
9