Chin Guard; Working Positions; Operating Positions - AGV Tourmodular User Manual

4 CHIN GUARD

4.1 OPENING AND CLOSING
›
›
1

4.2 WORKING POSITIONS

Tourmodular can be used with the chin guard
raised while riding. To do this, the chin guard
must be locked in the vertical position through
the special lever placed near the right-side
visor mechanism.
›
›
1 - unlocked 1 - unlocked
To open the chin guard, pull down the front
1
lever and push up the whole component.
To close the chin guard, push it down until a
clench noise is heard.
To lock the chin guard, move the lever
from position 1 - unlocked to position
2 - locked.
To unlock the chin guard, move the lever
back from position 2 - locked to position
1 - unlocked.
To lower down the chin guard after it has
been locked, the lever must be returned
to the unlocked position.
To maximize safety while riding, the hel-
met should be used with the chin guard
closed.
2 - locked 2 - locked
5 VISOR
Optical Class 1 polycarbonate
with anti-scratch treatment on both sides
2
Double-engagement central button-type Double-engagement central button-type
locking mechanism with micro-opening locking mechanism with micro-opening
3
position and closure adjustment position and closure adjustment
Contoured inner surface to accommodate the Contoured inner surface to accommodate the
1
Pinlock Pinlock
5.1 OPENING AND CLOSING
Prerequisite: the visor is closed.
›
Prerequisite: the visor is open.
›

5.2 OPERATING POSITIONS

• Open position
• Micro-opening position (see 5.5)
• Closed position
EN
FR
DE
120 anti-fog lens 120 anti-fog lens
® ®
ES
1
To open the visor, press its opening button
PT
and, in a single movement, push upwards the
2
edge of the visor .
РУ
To close the visor, push it down until you feel
the plastic tab 3 engage inside the button.
中文 中文
While riding, the visor must be kept in the
closed or micro-opening position. It is not
safe to ride with the visor open.
If the helmet is not used for a long time,
the visor should be placed in the mi-
cro-opening position.
IT
9