Replacing The Battery - ViewSonic PJ551D-2 User Manual

For the first time use:
Remove the transparent insulation tape by pulling
it before use.
For battery change:
1. Push the catch to the right and remove the battery
holder.
2. Remove the old Lithium coin cell and install new one
(CR2025). Ensure that the side with the mark "+" is up.
3. Push the battery holder back into the remote control
until you feel a click.
Keep the battery out of the reach of children. There is a danger of death by
accidentally swallowing the battery.
Do not recharge the used battery or expose the battery to fire or water.
Do not dispose of the used battery along with household waste. Dispose of
used batteries according to local regulations.
Danger of explosion may happen if batteries are incorrectly replaced.
Replace only with the same type recommended by the manufacturer.
ViewSonic 8
Catch
Battery holder
PJ551D