Before Requesting Help - Panasonic KX-F1150 Operating Instructions Manual

Before requesting help
General
PROBLEM
I cannot make and receive calls.
I cannot make calls.
The umt does not work
The umt does not ring.
The REDIALJPAUSE button does
not function properly.
While programming, I cannot
enter the activation code or the
proh1b1tor ID.
Fax Transmission
PROBLEM
The other party complains that
letters on their received
document are distorted
The other party complains dirty
patterns or black Imes appear on
their received documents
I cannot make an international
fax call.
66
CAUSE
&
REMEDY
• The power cord or telephone hne cord Is not connected Confirm the
connection (p 13)
• The dialing mode setting Is wrong Check the selector (p 13)
•Disconnect the unit from the telephone line and connect to a known
working phone
If
the known working phone operates properly, call
your service personnel to have the unit repaired If the known
working phone does not operate properly, consult with your
telephone company
•The ringer volume Is set to OFF Raise 11 to a suitable level (p 16)
•If this button Is pressed during d1ahng, a pause will be inserted
If
this
button Is pressed ImmedIately after a dial tone Is obtained, the last
number dialed will be redialed
•The whole or part of the number Is same as another code or ID
Change the number (p 40, 41, 50, 56)
CAUSE & REMEDY
•If your line has special telephone services such as call waiting, the
service may have been activated during the fax transmIssIon
Connect the unit to a hne that does not have such services
• Another telephone connected to the same line Is off hook Hang up
and try again
•The glass or rollers are dirty Clean them (p 74)
• Use the overseas transmIssIon mode (p 38)
•Add two pauses at the end of the phone number (p 35)