Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Babyletto Gelato 12901
Summary of Contents for Babyletto Gelato 12901
- Page 1 Item# 12901 Gelato 4-in-1 Cot Assembly Instructions revised 10DEC2019...
- Page 2 For Australia : Thank you for purchasing this nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.designkids.com.au. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly.
- Page 3 PARTS Not to Scale C-1. Front Left Leg A-1. End Panel (2) B. Side Panel (2) C-2. Front Right Leg D-1. Rear Left Leg E. Foot (4) F-1. Mattress Support U12901 D-2. Rear Right Leg G. Toddler Bed Conversion Kit HARDWARE Bolts in Actual Size H1.
- Page 4 ASSEMBLY INSTRUCTIONS C / D C / D DO NOT OVERTIGHTEN.
- Page 5 H1 H5 H5 H1 DO NOT OVERTIGHTEN.
- Page 6 CARE AND SAFETY: THIS UNIT IS SUPPLIED WITH EXTRA BOLTS THAT SECURES THE HOLES ACCESSIBLE TO THE CHILD. FAILURE TO USE THIS COULD RESULT DANGER. WE RECOMMEND THAT YOU USE THIS SAFETY DEVICE. When putting the mattress support (F-1) at the higher position, use the provided bolts and caps (H9) and plug the corresponding holes at the lower position as illustrated.
- Page 7 * Make sure the mattress support U12901 (F-1) is level. DO NOT OVERTIGHTEN.
- Page 8 KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. Recheck all screws and bolts to be sure they are fastened securely. Do not overtighten. Before using your cot, please read all cautionary statements on the insert sheet. Finish CAUTION: ANY MATTRESS USED IN THIS COT MUST BE AT LEAST 27 1/4 INCHES (69CM) BY 51 5/8 INCHES (131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
- Page 9 WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death. READ ALL INSTRUCTIONS BEFORE ASSEMBLING COT. KEEP THE MANUAL FOR FUTURE USE. WARNING: WARNING: Parents should ensure a safe environment for the child by checking regularly, before placing the Please do NOT remove any wood screws child in the product, that every component is in the normal disassembly of the cot.
- Page 10 WARNING: TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP. RECOMMENDED MATTRESS SIZE: This cot has been manufactured for use with a mattress which measures 690 mm wide by 1310 mm long and 150 mm (or less) in thickness.
- Page 11 AUSTRALIA - WARRANTY Ubabub International Pty Ltd warrants that your Gelato 4-in-1 Cot will be free from defects the whole product for a period of one year, from the date of purchase. This warranty only applies where the product is completely and correctly assembled and used in accordance with all accompanying recommendations and users instructions.
- Page 12 NEW ZEALAND - WARRANTY Designer Baby Brands warrants that your Gelato 4-in-1 Cot will be free from defects for a period of one year from the date of purchase, in accordance with the New Zealand consumer guarantees act. This warranty only applies where the product is completely and correctly assembled and used in accordance with all accompanying recommendations and users instructions..
- Page 13 Item# 12901 Gelato 4-in-1 Cot Toddler bed conversion assembly * All of the parts and hardware you will need are supplied with the crib at the time of purchase.
- Page 14 ASSEMBLY INSTRUCTIONS CARE AND SAFETY: THIS UNIT IS SUPPLIED WITH EXTRA BOLTS THAT SECURES THE HOLES ACCESSIBLE TO THE CHILD. FAILURE TO USE THIS COULD RESULT DANGER. WE RECOMMEND THAT YOU USE THIS SAFETY DEVICE. When putting the mattress support (F-1) at the lower position, use the provided bolts and caps (H9) and plug the corresponding holes at the higher position as illustrated.
- Page 15 DO NOT OVERTIGHTEN. Finish TO AVOID DANGEROUS GAPS, ANY MATTRESS USED IN THIS BED SHALL BE A FULL-SIZE COT MATTRESS AT LEAST 51 5⁄8 IN. (131 CM) IN LENGTH, 27 1⁄4 IN. (69 CM) IN WIDTH, AND A MAX THICKNESS OF 6 IN. (15 CM). THE INTENDED USER'S MINIMUM AGE MUST BE AT LEAST 15 MONTHS OLD AND MAXIMUM WEIGHT MUST NOT EXCEED 50 LBS (22.7 KG).
- Page 16 Item# 5789 Full Size Conversion Kit (5789 - Sold Separately) This cot is convertible to a full size bed. M5789 Full Size Conversion Rail is recommended, please contact your retailer.
Need help?
Do you have a question about the Gelato 12901 and is the answer not in the manual?
Questions and answers