ViewSonic Wireless Media Gateway WMG80 User Manual page 74

6 I forgot my password. What do I do?
•
Press and hold Reset on the back of the Gateway for 6-10
seconds. The Gateway then resets to factory defaults.
Reconfigure your Gateway all over again.
7 Why does the Gateway take a long time to boot and
get ready to use?
•
The Wireless Media Gateway supports lots of features and
functions that requires it to load file server and drivers to
function appropriately. Therefore,it would need approximately
one minute to fully load all of these modules and drivers. In
order to provide optimal performance like streaming video,
print server, file server, the Gateway must load all of these
modules and drivers.
•
If is recommended you do not cancel a large file transfer or
power off/on the Gateway. This might cause corruption on the
HDD. Wait until the process (file transfer) is complete.
8
How do I transfer content from my PC to the Gateway hard
drive?
See the Utilities section in this guide.
ViewSonic Wireless Media Gateway 68