ViewSonic Wireless Media Gateway WMG80 User Manual page 73

4 I can't connect to other computers on my LAN.
• The IP Addresses of the computers are not set correctly.
Make sure that each computer has a unique IP Address. If
using DHCP through the AP
each computer is enable DHCP function and restart the
computer.
• Network cables are not connected properly. Make sure that
the Link LED is on. If it is not, try a different network cable.
• Windows network settings are not set correctly. Check
each computer for correct network settings.
5 I can't access the Gateway from a wireless network card.
• Out of range. Make sure that your computer is within range
and free from any strong electrical devices that may cause
interference.
• IP Address is not set correctly. Make sure that the Mode,
SSID, Channel and encryption settings are set the same on
each wireless adapter.
• Check your IP Address to make sure that it is compatible
with the Gateway.
•
Do not attempt to use the Gateway in a metal closet or other
enclosed area that prevents the antenna from sending and
receiving signals.
ViewSonic Wireless Media Gateway
, makes sure that
Gateway
67