General Information - Bently Nevada PROXIMITOR 3500/42 Operation And Maintenance Manual

General Information

2.
The 3500/42 Proximitor®/Seismic Monitor is a four channel monitor that accepts
input from Proximitor and Seismic Transducers and uses this input to drive
alarms. The monitor can be programmed using the 3500 Rack Configuration
Software to perform any of the following functions: Radial Vibration, Thrust
Position, Eccentricity, Differential Expansion, Acceleration, and Velocity. The
monitor can receive input from many types of transducers including the following
Bently Nevada transducers:
Proximitor Transducers
7200 5, 8, 11, & 14 mm
3300 5, 8 mm, & 16 mm HTPS
RAM
3000
Status LEDs,
refer to Section
2.3
Buffered
Transducer
Outputs
Provides an
unfiltered output
for each of the
four transducers.
All are short
circuit protected.
I/O Module,
Internal
Termination,
refer to
Section 4.2
2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
General Information
Acceleration
Std. Accel Interface Module
High Frequency Interface
Module
Front Panel
I/O Module,
External
Termination,
refer to
Section 4.5
3500/42 Operation and Maintenance
Velocity
9200, 47633, 86205
Velomitor
High Temperature Velomitor
I/O Modules without Barriers
TMR I/O Module,
External
Termination, refer
to Section 4.5