Troubleshooting - AEG X Precision VX9 Instruction Book

NB: Remove the batteries from the product before scrapping. Follow your
country's rules for collection of batteries and electrical products.
Enjoy a great cleaning experience with VX9!
TIPS ON HOW TO GET THE BEST RESULTS
NOZZLE/ACCESSORY
K. 3in1 accessory tool*
1 2 3
X. Turbo nozzle*
Z. ParkettoPro nozzle*
AB. Long crevice nozzle*
Models with manual power regulation
– follow graphics on cleaner for optimal performance.

TROUBLESHOOTING

PROBLEM
The vacuum cleaner does not start
The s-bag® indicator light is illuminated
The filter indicator light is illuminated (only at
specific models)
The cleaner stops
Reduction of suction capacity versus normal
Water has been sucked into the vacuum
cleaner
For any further problems, contact an authorized AEG service centre.
www.aeg.com
USE FOR:
3 tools in 1:
1. Dusting tool for hard surfaces
(bookshelves, skirting boards etc).
2. Upholstery tool for textiles (curtains,
upholstery etc).
3. Crevice tool for narrow spaces
(behind radiators etc).
Carpet nozzle:
- Brushes and vacuums at the same
time (best pick up of hair, fibres etc).
- Brush roller is driven by the airflow of
the vacuum cleaner.
- Not suitable for carpets with very
deep piles and long fringes, anti-slip
carpets like door mats or water
resistant carpets. Use universal nozzle
instead.
Hard floor nozzle:
- For gentle cleaning of hard floor
(parquet, wooden floor, tiles etc).
- Best dust pick up on hard floor with
crevice.
Extra long tool:
- For areas hard to reach (top of
shelves etc).
- For narrow spaces (behind radiators,
under car seats etc).
Models with AUTO-function automatically adjust the suction power
in order to give an optimal cleaning performance and comfort on every surface. For
manual regulation, follow graphics for optimal performance.
SOLUTION
• Check that the cable is connected to the mains.
• Check that the plug and cable are not damaged.
• Check for a blown fuse.
• Check if the battery indicator lamp in the remote control handle responds (certain models only).
• Check if the s-bag® is full or blocked.
• If you have already changed the s-bag®, change the motor filter.
Change, or wash (if washable), the exhaust filter.
The cleaner might be overheated: disconnect it from the mains; check if the nozzle, tube, hose or filters are
blocked. Let the cleaner cool down for 30 minutes before plugging it in again.
If the cleaner still does not work, contact an authorized AEG service centre.
• Check if the s-bag is full or blocked.
• Check if the motor filter is clogged and needs changing.
• Check if nozzle is blocked and needs to be cleared.
• Check if hose is blocked by squeezing it gently. However, be careful in case the obstruction has been caused by
glass or needles caught inside the hose.
Note: The warranty does not cover any damage to the hose caused by cleaning it.
It will be necessary to replace the motor at an authorized AEG service centre.
Damage to the motor caused by the penetration of water is not covered by the warranty.
AEG reserves the right to change products, information and specifications
without notice.
NOZZLE/ACCESSORY USE FOR:
V. PrecisionFlow nozzle* Universal nozzle:
W. PrecisionFlow LED - For all floor types, secures best dust pick up
nozzle on both carpets and hard floors.
(with front lights)*
- Change nozzle setting with the pedal. Icon
will show recommended floor type.
- Front light helps to detect dust and
dirt in dark spaces (under furniture etc).
PrecisionFlow LED only
Y. Mini Turbo nozzle* Upholstery nozzle:
- Brushes and vacuums at the same time (best
pick up of hair, fibres etc).
- For textile furniture, car seats, mattresses etc.
- Brush roller is driven by the airflow of the
vacuum cleaner.
- Not suitable for carpets with very deep pile
and long fringes as it can get stuck in the
rotating brush roll.
AA. FlexProPlus nozzle* Hardfloor nozzle:
- For reach under/between furniture, corners
and other obstacles.
- Can easily turn 180 degrees for direct access
to narrow spaces.
GB
DE
AR
ES
FA
FR
GR
IT
NL
PT
5