Setting The Cutting Height - Ryobi RY48ZTR100 Original Instructions Manual

OPERATION OPERATION

SETTING THE CUTTING HEIGHT

1. Step on the brake pedal, and engage
the parking brake.
2. Push down the blade engage knob to
stop the blades. Turn the start key to the
OFF position.
3. Set the cutting deck to the preferred
cutting height.
NOTE: The auto-stop plug (included) stops
the lever to the preferred cutting height.
After the correct height is set, insert the
auto-stop plug below the lever.
1
1
2
2
1
2
3
2
1
27