Advertisement
Quick Links
GV-5016
The GV-5016 Card provides up to 16 video and 16 audio channels, recording up to 480 / 400
fps (NTSC / PAL) in total with H.264 hardware compression. The new technology of
resolution is employed to enhance the live image without DSP Overlay. Even in multi views,
the image on the largest division view can remain at high-quality resolution without DSP
Overlay.
Minimum System Requirements
OS
CPU
RAM
HDD
Graphic Card
DirectX
Packing List
1. GV-5016 Card x 1
2. 1-16 LFH-Type Audio and Video Cable x 1
3. Hardware Watchdog Jumper Wire x 1
May 16, 2013
32-bit
Windows XP / Windows Vista / Windows 7 / Windows Server 2008
64-bit
Windows 7 / Windows Server 2008 R2
GV-5016
GV-5016 x 2
GV-5016
GV-5016 x 2
GV-5016
GV-5016 x 2
AGP or PCI-Express, 800 x 600 (1280 x 1024 recommended), 32-
bit color
9.0c
Core 2 Quad, 2.4 GHz
Core i5 650, 3.20 GHz
2 x 1 GB Dual Channels
500 GB
1 TB
4. USB Dongle x 1
5. Software DVD x 1
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for GeoVision GV-5016
Summary of Contents for GeoVision GV-5016
- Page 1 GV-5016 The GV-5016 Card provides up to 16 video and 16 audio channels, recording up to 480 / 400 fps (NTSC / PAL) in total with H.264 hardware compression. The new technology of resolution is employed to enhance the live image without DSP Overlay. Even in multi views, the image on the largest division view can remain at high-quality resolution without DSP Overlay.
- Page 2 Cable Figure 3 Note: 1. The GV-5016 Card only works when the supplied USB Dongle is inserted to PC. 2. The GV-5016 Card cannot work with microphones which acquire power from the PC. Use microphones which have external power supply.
- Page 3 Connecting Two GV-5016 Cards You can install two GV-5016 Cards for a total of 32 channels. Master Card is the card with 1- 16 channels and Slave Card is that with 17-32 channels. Normally, the card attached to the lower PCI-E slot number will act as Master, and the card attached to the higher PCI-E slot number will act as Slave.
- Page 4 PC Reset Switch PWSW Hardware Watchdog Motherboard Front Panel Jumper GV-5016 Card Figure 5 Note: To locate the motherboard’s Reset (+) pin and (-) pin, please refer to the motherboard’s user manual. May 16, 2013...
-
Page 5: Installing Drivers
Installing Drivers After installing the GV-5016 Card in the computer, insert the software DVD to install GV- Series drivers. The DVD will run automatically and an installation window will pop up. Select Install or Remove GeoVision GV-Series Driver, and select the following two options to install card and USB dongle drivers. - Page 6 One distinct feature of GV-5016 Cards is their ability of hardware compression, providing you with higher system performance and DVD recording quality. To take full advantage of GV-5016 Cards, you can adjust the video settings, including the recording quality and frame rate, before running the GV-System.
- Page 7 5. The Enable hardware-compressed data FIFO option is disabled by default. When the option is enabled, the hardware-compressed data from the video IP device, such as IP camera, video server and compact DVR, will be transmitted directly to remote servers instead of being compressed again on the DVR.
-
Page 8: Specifications
168 x 70 mm / 6.61 x 2.75 in Note: 1. GV-5016 does not support the TV-Out function. 2. To work together with GV-5016, GV-NET/IO Card V3.1 must be set in the I/O Box Mode and connected to the PC through USB or DB9. May 16, 2013...
Need help?
Do you have a question about the GV-5016 and is the answer not in the manual?
Questions and answers