Honda Civic Hybrid Manual page 63

07/08/22 17:22:07 32SND620_063
Installing a Child Restraint System
Installing a Child Restraint
System with a Lap/Shoulder Belt
(without a Lockable Retractor)
When not using the lower
anchorages system, all child
restraint systems must be secured to
the vehicle with the lap part of a lap/
shoulder belt.
To properly route a lap/shoulder belt
through a child restraint system,
follow the restraint system maker's
instructions.
For EU countries, refer to page
50 for installing a child restraint
system.
The procedures in the following
pages are described based on a front
facing child restraint system.
58
Driver and Passenger Safety
1. Place the child restraint system in
the desired back seating position.
Make sure the child restraint is
positioned well back in the seat-
back.
2. Route the belt through the
restraint according to the restraint
system maker's instructions, then
insert the latch plate into the
buckle.
TAB
3. Push down the tab. Route the
shoulder part of the belt into the
slit at the side of the restraint.