Honda Civic Hybrid Manual page 249

07/08/22 17:47:20 32SND620_249
Lights
On some types
Remove the turn signal light bulb
from the socket by pushing the
bulb in and turning it
anticlockwise until it unlocks.
Install the new bulb in the socket.
Turn it clockwise to lock it in place.
4. Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
5. Turn on the lights to make sure
the new bulb is working.
244
Maintenance
Replacing Rear Bulbs
(in Fenders)
FASTENER SCREW
1. Open the boot.
For some types
Use the flat-tipped screwdriver to
remove the screws in the centre of
each fastener on the side of the
boot lining. Remove the fasteners
first, then pull the lining back
carefully.
BULB
SOCKET
BULB SOCKET
2. Determine which of the two bulbs
is burned out: stop/tail-light or
turn signal light.
3. Remove the socket by turning it
one-quarter turn anticlockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.