Honda Civic Hybrid Manual page 254

07/08/22 17:48:09 32SND620_254
3. Reinstall the socket. Turn it
clockwise until it locks.
4. Turn on the lights to make sure
the new bulb is working.
Replacing a Rear Licence Plate
Bulb
FASTENERS
1. Open the boot.
On some types
Use the Phillips-head screwdriver
to remove the screws in the centre
of each fastener on the back of the
boot lid. Remove the fasteners
first, then pull the lining back
carefully.
BULB
SOCKET
2. Remove the socket from the light
assembly by squeezing the tabs on
both sides of the socket.
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
CONTINUED
Maintenance
Lights
249