Table of Contents
Advertisement
2. Use proper tools to drill two holes where
you marked. Insert the screws into the
holes. If the wall is made out of concrete,
drill the holes first, insert the plastic
anchors and then insert the screws.
Note: When you tighten the screws, leave 3mm for fi tting the mounting
base over the screw-heads.
3. Place the mounting base over the screws
that are inserted into the wall or ceiling.
Make sure to fit the screw-heads over
the big holes in the base, and slide
it downward to lock firmly in place.
Lightly pull the base forward to make
sure that it is locked.
4. Place the base cover on the base and
screw the camera stem clockwise into
the mounting base.
5. Adjust the angle of the camera as
desired, then tighten the collar on the
camera stem to lock it in place.
9
Advertisement
Table of Contents
