Subscribe to Our Youtube Channel
Related Manuals for ZOSI C301
Summary of Contents for ZOSI C301
- Page 1 Wire-Free Battery Camera System Please read the Quick Start Guide carefully before using the product and keep it properly. Scan the QR code on the device via ZOSI Smart App.
-
Page 2: What's In The Box
What’s in the Box 4 x Camera 1 x NVR 1 x Power Adapter 1 x Ethernet Cable 1 x Wireless Receiver 1 x USB Mouse Quick Start Guide 4 x Mounting Screw Bag 4 x Mounting Base 1 x Quick Start Guide... -
Page 3: Product Appearance
Product Appearance LAN Port Antenna SD Card Slot HDMI USB Mouse Power RX USB Power Port Cord Indicator LED Connect Key Antenna Speaker HD Lens Charge Indicator LED Microphone IR-LEDs Rubber Plug (Power Port inside) White LEDs... - Page 4 Download ZOSI Smart App Connect your smartphone to WiFi network, scan the QR code below, and download and install the App to finish registration according to the instructions. Scan the QR code via smartphone to download ZOSI Smart App...
-
Page 5: Connect To Power Supply
Connect to Power Supply Connect the power port of the camera to outlet using the power adapter. Router DSL/CABLE MODEM... - Page 6 When the camera makes a hum, it means the camera is activated. The indicator LED is off after starting. Solid red light: the camera is pairing. The red light returns to off state, indicating the camera is connected successfully.
-
Page 7: Quick Configuration
Quick Configuration Operating the camera connection on the NVR operation page, press the connect key behind the battery camera, and start to configure. Connect Key... -
Page 8: Camera Installation
Camera Installation The mounting wall should have a certain thickness which can bear at least 3 times the weight of the camera. 1.Mount the Base 2.Mount the Anchoring Wall... -
Page 9: Adjust The Angle
Adjust the Angle Loosen the adjusting screw to adjust the angle of the camera. Tighten the adjusting screw after the adjustment. Wall Adjusting Screw... - Page 10 FAQs 1.Q: Why can't I add a device by using local search? A: Please make sure the device and mobile phone are in the same LAN. If you can't make both of them in the same LAN, please manually enter the UID of the device to add a device.
Need help?
Do you have a question about the C301 and is the answer not in the manual?
Questions and answers