Table of Contents
Advertisement
m
WARNING!
For optimal performance, use only
replacement cutting lines designed specifically for this electric
leaf mulcher/shredder (Model SDJ616L).
Monofilament lines having a maximum diameter of 0.1 in.
(0.25 cm) and a maximum length of 12.6 in. (32 cm) long may
be temporarily substituted, but this is NOT recommended.
Use of thicker lines, lines made of substitute material, or lines
greater than 12.6 in. (32 cm) long may result in permanent
damage to the motor and will void the manufacturer's
warranty. Immediately replace any worn parts of the spinner
head.
Storage
When storing the electric leaf mulcher/shredder at the end of
the season, disassemble the unit and stack the parts in the
following order (Fig. 18):
1. Place the funnel into the box.
2. Fit the motor housing into the funnel.
3. Place the funnel cover onto the motor housing
4. Rest the legs in the box beside the funnel.
Service and Support
If your electric leaf mulcher/shredder requires service or
maintenance, please contact the Snow Joe
center at 1-866-766-9563.
Model and Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found at the bottom of your electric leaf mulcher/
shredder. Copy these numbers into the space provided below.
Record the following numbers from the housing or handle of your
new product:
Fig. 18
10
customer service
®
Model #:
S D J 6 1 6
Serial #:
Advertisement
Table of Contents
