sunjoe CJ603E Operator's Manual

sunjoe CJ603E Operator's Manual

Electric silent wood chipper + shredder 15-amp | 1.7-inch | 21:1 reduction ratio
Hide thumbs Also See for CJ603E:

Advertisement

OPERATOR'S MANUAL
A Division of Snow Joe
, LLC
®
IMPORTANT!

Safety Instructions

All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
You and any other operator of this wood chipper + shredder
must read, understand, and follow these instructions in
their entirety. Failure to follow these instructions may result
in ELECTRIC SHOCK, FIRE, and/or serious PERSONAL
INJURY.
Notice the personal safety alert symbol
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
m
WARNING!
Wear appropriate personal hearing
protection during use. Under some conditions and duration of
use, noise from this product may contribute to hearing loss.
m
WARNING!
The rotating blades can cut you. Keep
hands and feet away from the feeding funnel and the ejection
slot.
Before using the wood chipper + shredder, familiarize yourself
with the controls, especially how to stop the unit in an
emergency. The only individuals who should use the wood
chipper + shredder are those who thoroughly understand
these instructions and know how to properly operate the unit.
Children should never be allowed access to the wood chipper
+ shredder.
Retain this manual for future reference and reread it at the start
of each chipping season.
General Safety
1. Avoid dangerous environments – Do not use the wood
chipper + shredder in rain or in damp or wet locations. Do
not operate the unit in gaseous or explosive atmospheres
© 2018 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
ELECTRIC SILENT WOOD
CHIPPER + SHREDDER
R
15-AMP | 1.7-INCH | 21:1 REDUCTION RATIO
Model CJ603E
m
used in this
or use the unit near flammable or combustible liquids.
Motors in these tools normally spark, and the sparks
might ignite fumes.
2. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Wear
a protective covering to contain long hair. Wearing rubber
gloves and substantial non-slip footwear is recommended
when working outdoors.
3. Use safety glasses – Also use dust mask, safety
footwear, snug-fitting clothing, protective gloves, hearing,
and head protection.
4. Extension cords – To prevent electric shock, use only
with an extension cord suitable for outdoor use.
5. Disconnect the tool – Disconnect the wood chipper +
shredder from the power supply when it is not in use,
before servicing it, when changing accessories, and when
performing any other maintenance task.
6. Do not abuse the cord – Never carry the wood chipper
+ shredder by the cord or yank the cord to disconnect it
from the receptacle. Keep the cord away from heat, oil,
and sharp edges.
7. Stay alert – Watch what you are doing. Use common
sense. Do not operate the wood chipper + shredder when
you are tired or under the influence of drugs, alcohol, or
other medication.
8. Store idle tool indoors – When not in use, the wood
chipper + shredder should be stored indoors in a dry and
high or locked-up place out of the reach of children.
9. Maintain the wood chipper + shredder with care –
Keep the cutting edges sharp and clean for optimal
performance and to reduce the risk of injury. Inspect the
extension cord periodically and immediately replace it
if damaged. Keep the handles dry, clean, and free from
oil and grease. Follow the additional recommendations
described in the Care + Maintenance section of this
manual.
10. Check for damaged parts – Before further use of the
appliance, a part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may affect its
operation. A part that is damaged should be properly
repaired or replaced. Contact the Snow Joe
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
SAVE THESE INSTRUCTIONS
1
Form No. SJ-CJ603E-880E-MR1
+ Sun Joe
®
®

Advertisement

Table of Contents
loading

Summary of Contents for sunjoe CJ603E

  • Page 1: Safety Instructions

    15-AMP | 1.7-INCH | 21:1 REDUCTION RATIO OPERATOR’S MANUAL Model CJ603E A Division of Snow Joe , LLC ® Form No. SJ-CJ603E-880E-MR1 IMPORTANT! or use the unit near flammable or combustible liquids. Motors in these tools normally spark, and the sparks Safety Instructions might ignite fumes.
  • Page 2: Personal Safety

    WARNING! 11. Lighting – Only operate your wood chipper + shredder in Never put your hands near the ejection daylight or good artificial light. slot. Failure to heed the warning could result in serious injury. 12. Do not overreach – Keep proper footing and balance at 10.
  • Page 3 Table 1. Method of Securing Extension Cord WARNING Cord set Appliance cord Electric shock may cause SEVERE INJURY or DEATH. Heed these warnings: • Do not allow any part of the wood chipper + shredder to make contact with water while it is in operation. If (A) Tie cord as shown the appliance becomes wet while turned off, wipe dry before starting.
  • Page 4: Double-Insulated Appliances

    Double-Insulated Appliances In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double- insulated appliance requires extreme care and knowledge of the system, and should be performed only by qualified service personnel at an authorized Snow Joe + Sun Joe...
  • Page 5: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, SAFETY ALERT –...
  • Page 6: Technical Data

    Know Your Electric Silent Wood Chipper + Shredder Read the owner’s manual and safety instructions carefully before operating the electric wood chipper + shredder. Compare the illustration below to the electric wood chipper + shredder in order to become familiar with the location of the various controls and adjustments.
  • Page 7: Carton Contents

    Unpacking 2. Insert the wheel axle into the two supporting legs, and re- assemble the washers and the shaft sleeves (Fig. 2). Carton Contents Fig. 2 • Electric silent wood chipper + shredder main body Supporting legs • Paddle Washer •...
  • Page 8: Operation

    Stand Assembly Fitting Fig. 7 ON button 1. Turn the shredder main body upside down, and fix the Forward position standing assembly with wheels on the bottom of the main body with the 4 nuts. Tighten the nuts with the wrench Forward/reverse (Fig.
  • Page 9: Overload Protection

    Overload Protection Insert the Fig. 9 Your electric wood chipper + shredder is designed with shredding material overload protection. If the shredder is clogged during shredding, the overload protection will cut the power Feeding automatically to protect your shredder. Wait at least 1 minute funnel before restarting the unit when the power is cut.
  • Page 10 5. Make sure that the feeding funnel and the ejection slot are Fig. 12 clean and clear of all waste material. 6. Make sure that all nuts, bolts and screws are tight and secure. 7. Always have any damaged or worn parts repaired, or replaced by qualified personnel.
  • Page 11: Service & Support

    Plastic coverings trap moisture around the shredder, which can damage the unit. Service + Support If your Sun Joe CJ603E electric wood chipper + shredder ® requires service or maintenance, please call the Snow Joe ® Sun Joe customer service center at 1-866-SNOWJOE ®...
  • Page 12: Troubleshooting

    Troubleshooting Possible Cause Problem Remedy • Check to make sure unit is plugged into a Motor does not run • Power failure/unit not plugged into a working outlet. Make sure extension cord is working receptacle. not damaged. • The overload protection has •...
  • Page 13 Accessories Item Model Sun Joe CJ601E electric wood chipper + ® CJ601E-1 shredder paddle Sun Joe CJ603E electric wood chipper + ® CJ603E-56 shredder counterplate Snow Joe + Sun Joe SJTW-A 14-gauge ® ® PJEXT50-B...
  • Page 14 NOTES...
  • Page 15 SNOW JOE + SUN JOE CUSTOMER PROMISE ® ® ABOVE ALL ELSE, Snow Joe + Sun Joe are dedicated to you, our customer. We strive to make your experience as pleasant ® ® as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us.
  • Page 16 snowjoe.com...

Table of Contents