Download Print this page

Cleaning Instructions - Canon DR-6010C Cleaning Manual

Hide thumbs Also See for DR-6010C:

1. Introduction

Overview

Prerequisites

Cleaning Instructions

1. Turn the power off (power button on bottom, right front of scanner) and unplug the black power cord from the

back of the scanner.

2. Carefully open the scanner cover by gently grasping the upper lid and swinging it up until it stops. Do not grasp

the lid in the middle where the rollers are located. This can damage the rollers and cause feed problems.

Page 4

The Canon DR‐6010C scanner is a TRANSFLO Express℠ supported scanner. This

document describes the process for cleaning the DR‐6010C scanner.

Make sure you have the following ready before you start cleaning your scanner:

1. Soft clean cloth

2. Fellowes cleaning wipes or Windex

3. Compressed canned air

Table of Contents