Fuselage; Wings - Cessna T303 Maintenance Manual

CESSNA MODEL T303 MAINTENANCE MANUAL
CESSNA PROGRESSIVE CARE
MODEL T303
OPERATION NO. 1
MECH INSP REMARKS
5-24. FUSELAGE.
A. Fire Protection (Chapter 26).
(1) Fire Warning Lights - Check operation.
(2) Portable Hand Fire Extinguisher - Inspect for proper
operating pressure, security of installation and evidence
of damage.
B. Flight Controls (Chapter 27).
1) Aileron Trim Tab Control and Indicator - Inspect for se-
curity and evidence of damage. Operate control and
check freedom of movement. Inspect turnbuckle safety-
ing.
(2) Rudder Trim Tab Control and Indicator - Inspect for se-
curity and evidence of damage. Operate control and
check rudder trim tab for freedom of movement.
(3) Elevator Trim Tab Control and Indicator - Inspect for se-
curity and evidence of damage. Operate both manually
and electrically.
C. Oxygen (Chapter 35).
(1) Oxygen System - Checkinstallation and pressure.
(2) Oxygen Regulator - Check pressure and flow rate.
(3) Oxygen Masks and Hoses - Check operation and clean.
(4)
Oxygen Cylinder - Inspect condition, check hydrostatic
test date.
D. Equipment/Furnishings (Chapter 25).
(1) All Seats - Inspect seat rails for cracks, refer to Chapter
for limitations.
5-25. WINGS.
A. Wings (Chapter 57).
*
(1) Wings - Check for loose rivets, cracks, loose mounting
fasteners and security.
(2) Wing Wheel Well - Check fume proofing.
(3) Wing Access Plates - Inspect for security of installation and
evidence of damage.
(4) Wing Spar Fittings - Check bolts for working and security.
*50-Hour Requirement, Refer to Paragraph 5-22, B.
Page 3 of 9