Cessna T303 Maintenance Manual page 16

CESSNA MODEL T303 MAINTENANCE MANUAL
CESSNA PROGRESSIVE CARE
MODEL T303
OPERATION NO. 3Cessna
DEALER INFORMATION
CUSTOMER AND AIRCRAFT INFORMATION
ZONE
NAME
SERVICING
DEALER NAME
ADDRESS
SERVICING
DEALER CODE
CITY & STATE
A C MODEL
AND SERIAL NO
REG NO
DATE
ENG SERIAL NO
ENG SERIAL NO
LEFT HAND
R H
ZONE CODE
SELLING
WARRANTY
DEALER CODE
START DATE
MECH INSP REMARKS
5-37.
TAILCONE.
A. Flight Controls (Chapter 27).
(1) Rudder - Inspect the rudder skins for cracks and loose rivets,
rudder hinges, hinge bolts, hinge bearings and hinge attach
fittings for evidence of damage or wear, failed fasteners and
security. Check the rudder hinge bolts for proper safety of
nuts with cotter pins.
(2) Rudder Bellcrank - Inspect bellcrank stop bolts for proper
safetying, corrosion, evidence of damage and safety. Inspect
bellcrank cables for proper safetying.
(3) Rudder Cables - Check cable tension and turnbuckle safety-
ing.
(4) Rudder Trim Tab - Inspect trim tab skins for cracks and loose
rivets. Inspect trim tab hinge for security and evidence of
damage, hinge pin for proper installation and cotter pin
safetying. Check trim tab free play and travel. Inspect horn
and pushrod for evidence of damage and security.
(5) Rudder Trim Tab Actuator - Inspect actuator for security and
evidence of damage, service.
(6) Rudder Trim Cables - Inspect cable tension and turnbuckle
safetying.
(7) Rudder Gust Lock - Check security, wear and travel.
(8) Elevator - Inspect the elevator skins for cracks and loose
rivets. Check elevator hinges for condition, cracks and
security. Inspect hinge bolts, hinge bearings, torque tube,
horn and attach fittings for evidence of damage or wear.
Check travel and friction.
(9) Elevator Bellcrank - Inspect bellcrank, pushrods, stop bolts,
jam nuts and brackets for corrosion, evidence of damage,
failed fasteners and proper safetying.
(10) Elevator Cables - Check cable tension and turnbuckle safety-
ing.
*50-Hour Requirement, Refer to Paragraph 5-22, B.
D5267-13 Page 1 of 6