IDK HDC-TH200 User Manual
  1. Manuals
  2. Brands
  3. IDK Manuals
  4. Transmitter
  5. HDC-TH200
  6. User manual
IDK HDC-TH200 User Manual

IDK HDC-TH200 User Manual

Hdmi/analog hdbaset transmitter
Hide thumbs Also See for HDC-TH200:
Table of Contents

Advertisement

Quick Links

Download this manual
⚫
Thank you for choosing our product.
⚫
To ensure the best performance of this product, please read this user guide fully and carefully before
using it and keep this manual together with the product for future reference as needed.
HDMI/Analog HDBaseT Transmitter
<Command Reference Guide>
IDK Corporation
HDC-TH200
<User Guide>
Ver.1.4.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDC-TH200 and is the answer not in the manual?

Questions and answers

Related Manuals for IDK HDC-TH200

Summary of Contents for IDK HDC-TH200

  • Page 1 HDMI/Analog HDBaseT Transmitter HDC-TH200 <User Guide> <Command Reference Guide> Ver.1.4.0 ⚫ Thank you for choosing our product. ⚫ To ensure the best performance of this product, please read this user guide fully and carefully before using it and keep this manual together with the product for future reference as needed.
  • Page 2 HDC-TH200 User Guide/Command Guide Trademarks ⚫ Blu-ray Disc and Blu-ray are trademarks of Blu-ray Disc Association. ⚫ ETHERNET is a registered trademark of Fuji Xerox Co., Ltd. ⚫ HDBaseT™ and the HDBaseT Alliance Logo are trademarks of the HDBaseT Alliance.
  • Page 3 ⚫ Some information contained in this User guide such as exact product appearance, diagrams, menu operations, and so on may differ depending on the product version. ⚫ This User guide is subject to change without notice. You can download the latest version from IDK’s website at: http://www.idkav.com...
  • Page 4 HDC-TH200 User Guide/Command Guide Safety Instructions Read and understand all safety and operating instructions before using this product. Follow all instructions and heed all warnings/cautions. Enforcement Symbol Description Indicates the presence of a hazard that may result in death or serious...
  • Page 5 ● Do not repair, modify or disassemble. Since the product includes circuitry that uses potentially lethal, high voltage levels, disassembly by unauthorized personnel may lead to the risk of fire or electric shock. For internal inspection or repair, contact your IDK Do not representative.
  • Page 6 Unplug If you continue to use the product under these conditions, it may increase the risk of electrical shock or fire. For maintenance and repair, contact your IDK representative. ● Unplug immediately if water or other objects are directed inside.
  • Page 7 HDC-TH200 User Guide/Command Guide Caution ■ For installing and connecting products: ● Do not place the product in a location where it will be subjected to high temperatures. If the product is subjected to direct sunlight or high temperatures while under operation, it may affect the product’s performance and reliability and may increase the risk of fire.

  • Page 8: Table Of Contents

    DIN plug AC adapter with locking mechanism ................19 6.3.4 Analog video input connector ...................... 21 6.3.5 Connection between HDC-TH200 and MSD-402 ............... 22 6.3.6 RS-232C communication of HDBaseT output connector ............22 Basic operation ............................23 Menu operations ..........................23 Locking menu operation keys ......................
  • Page 9 HDC-TH200 User Guide/Command Guide Analog video timing ..........................44 8.5.1 [ F08 ] Automatic measurement ....................44 8.5.2 [ F40 ] Automatic measurement of start position ................ 46 8.5.3 [ F42 ] The total number of horizontal dots ................. 48 8.5.4...

  • Page 10: Included Items

    HDC-TH200 User Guide/Command Guide 1 Included items Ensure that all items illustrated below are included in the package. If any items are missing or damaged, please contact IDK. One (1) main unit (HDC-TH200) DIN plug AC adapter with locking One (1) cable clamp mechanism (3.9 ft.

  • Page 11: About Hdc-Th200

    HDC-TH200 User Guide/Command Guide 2 About HDC-TH200 The HDC-TH200 is a transmitter for long-distance transmission of HDMI/DVI and Analog (video and audio) input signals over a category cable. Since HDMI/DVI signals are transmitted without compression or processing, the image quality can be kept.

  • Page 12: Features

    HDC-TH200 User Guide/Command Guide 3 Features ■ Video ・ Up to 1080p/QWXGA (Reduced Blanking) ・ HDCP 1.4 ・ 3D Y/C separation for NTSC and PAL signals ・ Automatic input signal equalization Input: Up to 98 ft. (30 m) ・ Up to 328 ft. (100 m) over Cat6 cable ・...

  • Page 13: Panels

    HDC-TH200 User Guide/Command Guide 4 Panels 4.1 Front panel [Fig. 4.1] Front panel drawing [Table 4.1] Front panel features Feature Description POWER LED Shows power status of the HDC. ON : Power is supplied to the HDC. OFF : Power is not supplied to the HDC.

  • Page 14: Rear Panel

    HDC-TH200 User Guide/Command Guide 4.2 Rear panel ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ [Fig. 4.2] Rear panel drawing [Table 4.2] Rear panel features Feature Description POWER LED Shows power status of the HDC ON : Power is supplied to the HDC.

  • Page 15: System Configuration Example

    HDC-TH200 User Guide/Command Guide 5 System Configuration Example HDMI/DVI HDMI/DVI HDBaseT Cat6 Rx for HDMI HDC-TH100-C HDC-RH100-C 　Up to 7 ft. (2 m) 　Up to 7 ft. (2 m) 　Up to 328 ft. (100 m) CAUTION CAUTION DON'T DON'T CONNECT...

  • Page 16: Precautions

    HDC-TH200 User Guide/Command Guide 6 Precautions Before connecting to external devices, follow the precautions below. 6.1 Attaching Rubber feet First, clean the bottom surface of the HDC as needed, and then peal the release papers from the rubber feet and place them in each of the four corners.

  • Page 17: Cabling

    HDC-TH200 User Guide/Command Guide 6.3 Cabling When connecting the HDC to external devices, please observe the following precautions. ・ Read manuals for the external devices. ・ Before connecting cables to the or an external device, dissipate static electricity by touching grounded metal such as equipment racks before handling signal cables.

  • Page 18: Category Cable

    HDC-TH200 User Guide/Command Guide 6.3.2 Category cable To ensure the best performance with category cables, select a high quality category cable type, ensuring that proper pinning and pairing requirements are observed. ・ Cat5e UTP/STP and Cat6 UTP/STP can be used, but we recommend CAT.5E HDC cable* for optimal performance.

  • Page 19: Din Plug Ac Adapter With Locking Mechanism

    HDC-TH200 User Guide/Command Guide Note: If there is a problem in the transmission path, video or audio may be interrupted. Check the “[Table 6.1]” above. If the problem persists, it may be necessary to shorten the category cable. 6.3.3 DIN plug AC adapter with locking mechanism The shapes of AC plugs with screw locking mechanism vary from country to country.
  • Page 20 HDC-TH200 User Guide/Command Guide ■ Plugging and unplugging DC plug Plug the DC plug to the power supply connector of the unit until it clicks Hold the portion mentioned below when unplugging the DC plug Hold this part and pull the DC plug [Fig.

  • Page 21: Analog Video Input Connector

    HDC-TH200 User Guide/Command Guide 6.3.4 Analog video input connector For analog video input, the D-Sub (15-pin) connector enables not only analog RGB signals (such as PC) to be input, but also supports analog YPbPr (SDTV/HDTV), composite video (NTSC/PAL), and S-video (NTSC/PAL) signal inputs using a conversion cable.

  • Page 22: Connection Between Hdc-Th200 And Msd-402

    HDC-TH200 User Guide/Command Guide 6.3.5 Connection between HDC-TH200 and MSD-402 When HDC-TH200 is connected to the MSD-402 using HDBaseT signal, its input channels can be switched from the MSD-402. For the details please see User Guide of MSD-402. 【See: 5 System Configuration Example】...

  • Page 23: Basic Operation

    HDC-TH200 User Guide/Command Guide 7 Basic operation 7.1 Menu operations You can set all input/output settings of video and audio signals from menu operation keys. Menu operation keys Select the menu number first and then select the setting number. If you do not operate for 10 seconds in step 5, you will go back to step 2.

  • Page 24: Locking Menu Operation Keys

    HDC-TH200 User Guide/Command Guide 7.2 Locking menu operation keys Press and hold the “SET” key for 3 seconds or longer to set/cancel key lock. [Fig. 7.2] Locking menu operation keys 7.3 Initialization All input and output settings will be initialized by powering on while pressing the “SET” key.

  • Page 25: Input Channel Remote Switching

    HDC-TH200 User Guide/Command Guide 7.4 Input channel remote switching Input channels can be switched via an IDK’s HDBaseT product (Digital multi switchers, Modular matrix switchers, and extender) using the communication command, “@GSW / @SSW Switching input channel”. 【See: 8.2.1 [ F05 ] Priority of input channel automatic switching】...

  • Page 26: Menus

    HDC-TH200 User Guide/Command Guide 8 Menus ・ Setup menus : setting video and audio signals in normal use ・ Maintenance menus : checking operation ・ Status display menus : displaying statuses of input signals and connection with sink devices Note: Normally, the maintenance menu and status display menu are not displayed as a default.

  • Page 27: Menu List

    HDC-TH200 User Guide/Command Guide 8.1 Menu list ■ Setup menu [Table 8.2] Setup menus (1/2) Setting Menu number and functions Page Setting value Default ― [ F00 ] Manual input channel switching Digital input/Analog input [ F01 ] Copying EDID...
  • Page 28 HDC-TH200 User Guide/Command Guide [Table 8.3] Setup menus (2/2) Setting Menu number and functions Page Setting value Default [ F40 ] Automatic measurement of start position No auto adjustment/ Auto Auto adjustment mode 1/ adjustment Auto adjustment mode 2 mode 1 －...
  • Page 29 HDC-TH200 User Guide/Command Guide ■ Maintenance menus [Table 8.4] Maintenance menus Setting Menu number and functions Page Setting value Default [ C01 ] Sink device EDID check Always recognize as HDMI When device/When EDID read error, EDID read recognize as HDMI device/When...

  • Page 30: Input Switching Setting

    HDC-TH200 will switch input channel under following conditions: ・ When new video signal is detected, HDC-TH200 switch the input channel to the detected channel ・ When current selected channel loose signal and if another channel has video signal, HDC-TH200 switch the input channel to the channel which has video image.

  • Page 31: F06 ] Audio

    HDC-TH200 User Guide/Command Guide Notes for when selecting a value other than “05” (Disabling): ・ This menu will be disabled if “8.2.3 [ F00 ] Manual input channel switching” menu is displayed or “CHANGE mode”* is executed. ・ The setting will be applied if “8.2.3 [ F00 ] Manual input channel switching” operation is completed and “CHANGE mode”* is set to OFF.

  • Page 32: F00 ] Manual Input Channel Switching

    HDC-TH200 User Guide/Command Guide 8.2.3 [ F00 ] Manual input channel switching You can switch input channel from front panel menu. “ – ” is assigned to digital input channel and “ + ” is assigned to analog input channel. During this menu is displayed automatic switching set by “8.2.1 [ F05 ] Priority of input channel automatic switching”...

  • Page 33: Input

    HDC-TH200 User Guide/Command Guide 8.3 Input 8.3.1 [ F16 ] No-signal input monitoring If you change the EDID settings of the HDC or power the HDC off/on, the source device may not output a video signal. Use this menu to set the monitoring time. This is the interval beginning when a source device is not outputting a signal;...

  • Page 34: F17 ] Digital Input Equalizer

    HDC-TH200 User Guide/Command Guide 8.3.2 [ F17 ] Digital input equalizer You can set digital input equalizer function that correct video attenuation automatically. Setting value on : ON (Auto) [Default] oFF : OFF Note: If using a 16 ft. (5 m) or longer cable, we recommend testing the application before installation. To avoid video interruption at the time of switching, set this function to ON.

  • Page 35: Edid

    HDC-TH200 User Guide/Command Guide 8.4 EDID 8.4.1 [ F01 ] Copying EDID EDID of sink devices can be read and stored, and the copied EDID can apply in the same way of internal EDID. Setting value on : Copying EDID...

  • Page 36: F10 To F11 ] Edid Resolution

    EDID for digital input and analog input can be set individually. “01 to 02” [ F10 ] : Can be selected only for digital input “03 to 22” are internal EDID which HDC-TH200 has. Menu number F10 : Digital input...

  • Page 37: F76 To F77 ] Selecting Edid Wxga

    HDC-TH200 User Guide/Command Guide [Table 8.7] Maximum resolution and supported pixels 1024 1280 1280 1280 1280 1280 1360 1366 1400 1440 1600 1600 1680 1920 1920 2048 Pixels 1024 768* 768* 1050 1200 1050 1080 1200 1152 Max. resolution 1080p(59.94/60)

  • Page 38: F20 ] Deep Color

    HDC-TH200 User Guide/Command Guide 8.4.4 [ F20 ] Deep Color You can set the Deep Color (color depth) that is output from the source device. Setting value 08 : 8 bit [Default] 10 : 10 bit 12 : 12 bit Notes: ・...

  • Page 39: F24 ] Ac-3 Dolby Digital Audio

    HDC-TH200 User Guide/Command Guide 8.4.6 [ F24 ] AC-3 Dolby Digital Audio You can set the maximum sampling frequency of AC-3 Dolby Digital Audio that is output from the source device. Setting value 32 : 32 kHz 44 : 44.1 kHz...

  • Page 40: F28 ] Dolby Digital Plus Audio

    HDC-TH200 User Guide/Command Guide 8.4.8 [ F28 ] Dolby Digital Plus Audio You can set the maximum sampling frequency of Dolby Digital Plus Audio that is output from the source device. Setting value 32 : 32 kHz 44 : 44.1 kHz...

  • Page 41: F32 ] Dts-Hd Audio

    HDC-TH200 User Guide/Command Guide 8.4.10 [ F32 ] DTS-HD Audio You can set the maximum sampling frequency of DTS-HD Audio that is output from the source device. Setting value 44 : 44.1 kHz 48 : 48 kHz 88 : 88.2 kHz 96 : 96 kHz 176 : 176.4 kHz...

  • Page 42: F36 ] Audio Channel

    HDC-TH200 User Guide/Command Guide 8.4.12 [ F36 ] Audio channel You can set the number of multiple channels to be output from the source device. Setting value 02 : LR [Default] 03 : 2.1 channel surround sound 06 : 5.1 channel surround sound 08 : 7.1 channel surround sound...

  • Page 43: F38 ] Copying Edid's Cec Physical Address

    The CEC physical address of the sink device that is connected to HDBaseT output connector can be copied into the EDID of the HDC-TH200 HDMI input connector. If the CEC physical address of the connected sink device and the HDC’s address are not the same, the CEC functions, such as input switching in the sink device at start-up, may not work correctly.

  • Page 44: Analog Video Timing

    8.5.1 [ F08 ] Automatic measurement Analog RGB/analog YPbPr input video is measured to set automatically. The HDC-TH200 has standard video timing formats settings. Normally the HDC recognize video input signals and use pre-registered standard timing formats. This menu is used for if the HDC cannot recognize video format or video is not recognized correctly with standard timing formats.
  • Page 45 HDC-TH200 User Guide/Command Guide Normal automatic measurement is executed with “on” setting. If unknown video format is input to the unit, the aspect ratio might not match with normal automatic measurement. In this case, please select the menu which has correct aspect ratio automatic measurement setting.

  • Page 46: F40 ] Automatic Measurement Of Start Position

    HDC-TH200 User Guide/Command Guide 8.5.2 [ F40 ] Automatic measurement of start position You can set automatic adjustment for analog video input. Automatic adjustment function will adjust input signal to center automatically by monitoring analog input video signal. Setting value oFF : No automatic adjustment to current input video on1 : Executing automatic “adjustment mode 1”...
  • Page 47 HDC-TH200 User Guide/Command Guide For video timing to be adjusted, see “[Table 8.9] Video timings which are adjusted by automatic adjustment mode”. Even if video timing is adjusted automatically, the timing setting saved in the HDC is not changed. [Table 8.9] Video timings which are adjusted by automatic adjustment mode...

  • Page 48: F42 ] The Total Number Of Horizontal Dots

    HDC-TH200 User Guide/Command Guide 8.5.3 [ F42 ] The total number of horizontal dots You can set the total number of horizontal dots of analog RGB/analog YPbPr input video. Setting value 400 to 4125 : 400 dots to 4125 dots Set value will be limited by sampling clock range from 13 MHz to 165 MHz.

  • Page 49: F44 ] Horizontal Active Area

    HDC-TH200 User Guide/Command Guide 8.5.5 [ F44 ] Horizontal Active area You can set horizontal active area. Setting value 20 to 2900 : 20 dots to 2900 dots Setting range is limited by setting of display period of horizontal dots.

  • Page 50: F46 ] Display Period Of Horizontal Dots

    HDC-TH200 User Guide/Command Guide 8.5.7 [ F46 ] Display period of horizontal dots You can set display period of horizontal dots. Setting value 20 to 2900: 20 dots to 2900 dots Setting range is limited by total number of horizontal dots and horizontal display start position.

  • Page 51: F48 ] Starting Position Of Vertical Lines

    HDC-TH200 User Guide/Command Guide 8.5.9 [ F48 ] Starting position of vertical lines You can set starting position of vertical lines for analog video input. Setting value 10 to 2048 : 10 lines to 2048 lines Setting range is limited by vertical display start position, display period of vertical lines, and vertical sync signal width.

  • Page 52: F50 ] Vertical Start Position

    HDC-TH200 User Guide/Command Guide 8.5.11 [ F50 ] Vertical start position You can set vertical display start position for analog video input. Setting value 10 to 2048 : 10 lines to 2048 lines Setting range is limited by total number of vertical lines, display period of vertical lines, and vertical sync signal width.

  • Page 53: F52 ] Vertical Sync Signal Width

    HDC-TH200 User Guide/Command Guide 8.5.13 [ F52 ] Vertical sync signal width You can set vertical sync signal width for analog video input. Setting value 1 to 20 : 1 line to 20 lines Setting range is limited by vertical display start position.

  • Page 54: Output

    HDC-TH200 User Guide/Command Guide 8.6 Output 8.6.1 [ F65 ] Audio output You can set audio output ON/OFF. Setting value on : ON [Default] oFF : OFF 8.6.2 [ F70 ] Deep Color output You can set output color depth.

  • Page 55: Advanced Setting

    HDC-TH200 User Guide/Command Guide 8.7 Advanced setting 8.7.1 [ F90 ] Version You can display the firmware version. 8.7.2 [ F99 ] Maintenance/status display menu You can set the display setting of the maintenance menu and status display menu. Setting value oFF : [Default] on : At the next start-up, settings of “oFF”...

  • Page 56: Checking Operation (Maintenance Menu)

    HDC-TH200 User Guide/Command Guide 8.8 Checking operation (Maintenance menu) You can set necessary items for operation verification. This menu is enabled and displayed by setting [F99] to “on” or “ALL”. To finish the operation, set the “SET” key. 【See: 8.7.2 [ F99 ] Maintenance/status display menu】...

  • Page 57: C06 ] Hdcp Input

    HDC-TH200 User Guide/Command Guide 8.8.2 [ C06 ] HDCP input Some source devices negotiate with the connected device to determine if HDCP encryption is supported. After this negotiation, the source device determines whether HDCP signal encryption is enforced or not.

  • Page 58: C10 ] Hot Plug Ignoring Duration

    HDC-TH200 User Guide/Command Guide 8.8.3 [ C10 ] Hot plug ignoring duration Time for ignoring the video output request signals sent from the sink device. If the request signals are repeated in a short cycle, the HDC processes video output from the first cycle.

  • Page 59: C14 ] Rs-232C Communication Speed

    HDC-TH200 User Guide/Command Guide 8.8.4 [ C14 ] RS-232C communication speed You can set the baud rate of RS-232C communication from the HDBaseT output connector. Setting value 48 : 4800 [bps] 96 : 9600 [bps] 192 : 19200 [bps] 384 : 38400 [bps] [Default] 【See: 7.4 Input channel remote switching】...

  • Page 60: C18 ] Hdbaset Output Long Reach Mode

    8.8.8 [ C18 ] HDBaseT output long reach mode You can enable/disable long reach mode for HDBaseT output. With long reach mode, up to 1080p (24 bit)/dot clock 148 MHz is supported when using with IDK’s HDBaseT product. Select a supported output format.

  • Page 61: Displaying Input/Output Statuses (Status Display Menu)

    HDC-TH200 User Guide/Command Guide 8.9 Displaying input/output statuses (Status display menu) Input and output statuses of the HDC can be displayed. The status display menus can be operated by setting [F99] to “on” (Display) or “ALL” (Always display). Press the “SET” key to exit the operation.

  • Page 62: L01 To L13 ] Displaying Digital Input Information

    HDC-TH200 User Guide/Command Guide 8.9.2 [ L01 to L13 ] Displaying digital input information [Table 8.12] Digital input information Menu Value to be Description number displayed ● HDMI/DVI mode and color depth of input video HDMI mode 24 bit/pixel (8 bit/component)
  • Page 63 HDC-TH200 User Guide/Command Guide [Table 8.13] Digital input information (Cont’d) Menu Value to be Description number displayed ● Audio input type and the number of channels n*: 1 = 2 channels, 2 = 2.1 channels, 5 = 5.1 channels, 7 = 7.1 channels - - - Unknown or No signal is input.

  • Page 64: L20 To L22 ] Displaying Analog Input Information

    HDC-TH200 User Guide/Command Guide [Table 8.14] Digital input information (Cont’d) Menu Value to be Description number displayed ● Audio input No audio is input. Input is being detected. Audio is input normally. - - - No signal is input. 8.9.3 [ L20 to L22 ] Displaying analog input information [Table 8.15] Analog input information...

  • Page 65: L30 To L60 ] Output Information

    HDC-TH200 User Guide/Command Guide 8.9.4 [ L30 to L60 ] Output information [Table 8.16] Output information Menu Value to be Description number displayed ● Deep Color 24 bit/pixel (8 bit/component) supported 30 bit/pixel (10 bit/component) supported 36 bit/pixel (12 bit/component) supported...

  • Page 66: Command

    HDC-TH200 User Guide/Command Guide 9 Command 9.1 Summary A command consists of “@” (“40” in hexadecimal), 3 one-byte alphabetical characters (upper and lower cases), and parameters (one-byte numbers). For some commands, multiple parameter values can be specified or parameters are not necessary. Processing is executed by sending a delimiter at the end of the command.

  • Page 67: Command List

    HDC-TH200 User Guide/Command Guide 9.2 Command list ■ Error status Command Function Page @ERR Error status ■ Input channel selection Command Function Page @GSW / @SSW Switching input channel ■ RS-232C communication Command Function Page @GCT / @SCT RS-232C communication ■...

  • Page 68: Details Of Commands

    HDC-TH200 User Guide/Command Guide 9.3 Details of commands 9.3.1 Error status @ERR Error status Description Response in case the command is not executed Response @ERR, error Parameter error: Error status 1 = Erroneous parameter format or value 2 = Undefined command or wrong format 5 = Menu is being set from the front panel.

  • Page 69: Rs-232C Communication

    HDC-TH200 User Guide/Command Guide 9.3.3 RS-232C communication @GCT / @SCT RS-232C communication Getting Command @GCT Response @GCT, ch, bps, length, parity, stop Setting Command @SCT, ch, bps, length, parity, stop Response @SCT, ch, bps, length, parity, stop Parameter ch: RS-232C channel...

  • Page 70: Advanced Setting

    HDC-TH200 User Guide/Command Guide 9.3.4 Advanced setting @GIS Digital input signal status Getting Command @GIS, mode Response @GIS, mode, status_1 (, status_2, status_3, status_4, status_5, status_6, status_7, status_8, status_9, status_10) Parameter mode: Target status 0 = All of 1 to 10 below...
  • Page 71 HDC-TH200 User Guide/Command Guide @GIS Digital input signal status (Cont’d) Parameter status_5: DDC power input state Value Description DDC Power on DDC power is input DDC Power off No DDC power is input status_6: Input resolution Value Description 1920x1080p 59.94Hz 1080p@59.94...
  • Page 72 HDC-TH200 User Guide/Command Guide @GIS Digital input signal status (Cont’d) Parameter status_8: Sampling frequency of audio input signal Value Description 22.05kHz 22.05kHz 24kHz 24kHz 32kHz 32kHz 44.1kHz 44.1kHz 48kHz 48kHz 88.2kHz 88.2kHz 96kHz 96kHz 176.4kHz 176.4kHz 192kHz 192kHz 768kHz 768kHz ―...
  • Page 73 HDC-TH200 User Guide/Command Guide @GIS Digital input signal status (Cont’d) Parameter status_10: Audio input status Value Description Audio Status #0 No audio is input Audio Status #1 Input is being detected Audio Status #6 Audio Status #7 Audio is input normally ―...
  • Page 74 HDC-TH200 User Guide/Command Guide @GAS Analog input signal status Getting Command @GAS, mode Response @GAS, mode, status_1 (, status_2, status_3) Parameter mode: Target status 0 = All of 1 to 3 below 1 = Analog input signal type 2 = Analog input video frequency...
  • Page 75 HDC-TH200 User Guide/Command Guide @GOS Sink device status Getting Command @GOS, mode Response @GOS, mode, status_1 (, status_2, status_3, status_4, status_5, status_6, status_7) Parameter mode: Target status 0 = All of 1 to 7 below 1 = Deep Color 2 = HDMI/DVI...
  • Page 76 ― Remarks @GIV Device information Getting Command @GIV Response @GIV, id, ver Parameter id : Model number ver : Firmware version Getting Command @GIV example Response @GIV,HDC-TH200,1.00 Description Getting the product information Model number: HDC-TH200; Firmware version: 1.00 － Remarks...

  • Page 77: Specification

    The maximum transmission distance is the shorter distance of connected HDBaseT product or sink device’s maximum transmission distance. Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK’s HDBaseT Products that supports 328 ft. (100 m) or longer.

  • Page 78: Troubleshooting

    HDC-TH200 User Guide/Command Guide 11 Troubleshooting This chapter provides recommendations in case difficulties are encountered during HDC setup and operation. In case the HDC does not work correctly, please check the following items first. ・ Are the HDC and all devices connected to power and indicating “powered on”? ・...
  • Page 79 HDC-TH200 User Guide/Command Guide Problem Cause/Check item/Solution Page Analog input video is [5] When analog input video is not output, please check input signal status. See “8.9.3 [ L20 to L22 ] Displaying analog not being output. input information” ・ [L20] Analog input signal type is “- - -” (no input) Please check connection between the unit and source.
  • Page 80 HDC-TH200 User Guide/Command Guide Problem Cause/Check item/Solution Page － Video is If using a long cable for input or output, replace it with a 16 ft. (5 m) disappeared, or shorter cable. Since the HDC has the equalizing function, long...
  • Page 81 HDC-TH200 User Guide/Command Guide Problem Cause/Check item/Solution Page Part of video is cut For analog input, set the automatic measurement of input timing in “8.5.1 [ F08 ] Automatic measurement”. off or black is displayed at edge(s). If there is problem still, please set by manually, using menu [F42] 48 to 53 to [F52].
  • Page 82 HDC-TH200 User Guide/Command Guide Problem Cause/Check item/Solution Page － Digital input audio is Is the video image output normally? not being output. If there is no video please confirm [1],[2],[3],[4],[7],[8], and [9] Is DVI signal output from the source device? You can check the input signal type in [L01] HDMI / DVI mode and color depth of input video.
  • Page 83 HDC-TH200 User Guide/Command Guide User Guide/Command Guide of HDC-TH200 Ver.1.4.0 Issued on: 28 July 2020 Headquarters IDK Corporation 7-9-1 Chuo, Yamato-shi, Kanagawa-pref. 242-0021 JAPAN TEL: +81-46-200-0764 FAX: +81-46-200-0765 Email: idk_eng@idk.co.jp URL: http: //www.idkav.com IDK America Inc. 72 Grays Bridge Road Suite 1-C, Brookfield, CT 06804 TEL: +1-203-204-2445 Email: sales@idkav.com URL:...

Table of Contents