Table of Contents
Advertisement
4
BDL5587XL LCD
REAR VIEW
1. VIDEO SOURCE button
• Use this button to select the input source.
• When the On Screen Display menu is active, this is also used
as the SET button.
2. MENU button
• Use this button to engage the On Screen Display menu.
• When the On Screen Display menu is active, use this button
to return to the previous menu.
/
3.
button
• When the On Screen Display menu is active, use these as
the UP/DOWN menu buttons.
• Press and hold the
seconds to lock or unlock all buttons.
/
4.
button
• When the On Screen Display menu is active, use these as
the PLUS/MINUS menu buttons.
5. POWER button
Use this button to turn the display on or into standby mode.
6. Power indicator
Indicates the operating status of the unit:
- lights green when the display is turned on
- lights red when the display is in standby mode
- blinks red when the display enters DPMS mode
- off when the main power of the display is turned of
7. Smart Insert installation holes
Screw holes for the Smart Insert (for integration of a small
form factor PC). (Maximum load: 2kg)
8. Cable retainer installation holes
Install the cable retainer using these holes.
9. Remote control sensor, ambient light sensor and power
indicator
• Receives command signals from the remote control.
• Detects the ambient lighting conditions around the display.
• Indicates the operating status of the unit:
- lights green when the display is turned on
- lights red when the display is in standby mode
- blinks red when the display enters DPMS mode
- off when the main power of the display is turned off
10. Carrying handle
Use these handles when lifting or moving your display.
and
buttons simultaneously for 3
f
Installation
INPUT/OUTPUT TERMINALS
1.
AUDIO IN (AUDIO1)
Connects to the audio output of a computer.
2.
AUDIO OUT R/L
Outputs the audio signal from the AUDIO IN
(AUDIO1/AUDIO2/AUDIO3), DISPLAY PORT or HDMI jack.
3.
SPEAKERS R/L
Outputs the audio signal from the AUDIO IN
(AUDIO1/AUDIO2/AUDIO3), DISPLAY PORT or HDMI jack to
external speakers.
4.
AUDIO IN (AUDIO2/AUDIO3)
Connects to the audio output of an AV device.
5.
RJ45
Connects to the RJ45 port on your media player or network
switch.
6.
RS-232C (IN/OUT)
RS232C network connection input/output for the use of loop
through function.
7.
USB
Connects to a USB flash drive (for firmware updates and display
cloning only).
8.
YPbPr
Component video input (YPbPr) for connecting to the component
output of an AV device.
9.
VGA OUT Outputs the VGA signal from the VGA IN jack.
10. VGA IN Connects to the VGA output of a PC or media
player.
11. DVI-D OUT
Outputs the DVI-D signal from the DVI-D IN jack.
12. DVI-D IN
Connects to the DVI-I connector of a PC (receiving only the
DVI-D signal) or to the HDMI output of an AV device (Using a
DVI-HDMI cable).
13. DISPLAY PORT
Connects to a Display port compatible device.
14. HDMI
Connects to the HDMI output of an AV device or to the DVI-D
output of a PC. (Using a DVI-HDMI cable/ adapter)
15. IR (OUT/IN)
For use with an IR Extender – to ensure better responsiveness
from the remote control.
16. Main power switch
Press to switch the main power on/off.
17. AC IN (4.0 A)
Connects the supplied power cord to the wall outlet.
18. AC OUT (1.5 A)
Can be used to power an external media device
Advertisement
Table of Contents
