Table of Contents
Advertisement
Remote Control
FULL, NORMAL, DYNAMIC, CUSTOM, REAL, and 21:9. PIP (Picture
In Picture) buttons
•
ON/OFF button: To turn PIP mode ON/OFF.
•
INPUT button: To select the input signal for the sub-picture.
•
CHANGE button: To exchange between the main picture and
sub picture.
Note: The "PIP" mode does not work if the screen size is set to
"CUSTOM", "DYNAMIC", "REAL" or "21:9".
CONTRAST button
Press to open the CONTRAST OSD selection, and then press the PLUS
or MINUS button to adjust the value.
BRIGHTNESS button
Press to open the BRIGHTNESS OSD selection, and then press the
PLUS or MINUS button to adjust the value.
DISPLAY button
To turn on/off the setting information displayed on the upper right corner
of the screen.
MENU button To turn the OSD menu on/off.
POWER button
Press to switch on the monitor from
standby mode. Press again to turn it off
to standby mode.
SMART button
To select smart picture mode from:
• HIGHBRIGHT: for moving image
such as Video
• STANDARD: for images (factory
setting)
• sRGB: for text based images
• CINEMA: for movies.
• CUSTOM: use your own picture
setting. The mode is automatically
selected after you change the settings
in the PICTURE menu.
VIDEO SOURCE button
To activate the video source selection
menu. Press it repeatedly to select the
video input source from HDMI, DVI-D,
VGA, COMPONENT, S-VIDEO, and
VIDEO.
AUDIO SOURCE button
To activate the audio source selection
menu. Press it repeatedly to select the
video input source from HDMI, AUDIO
1, AUDIO 2, and AUDIO 3.
Picture format button
To switch screen aspect ratio between
Installation
UP button
• To move the highlight bar up to adjust the selected item when OSD
menu is on.
• To move the sub-picture up in "PIP" mode.
DOWN button
• To move the highlight bar down to adjust the selected item when OSD
menu is on.
• To move the sub-picture down in "PIP" mode.
PLUS button
• To increase the adjustment with OSD menu.
• To move the sub-picture right in "PIP" mode.
MINUS button
• To decrease the adjustment with OSD menu.
• To move the sub-picture left in "PIP" mode.
SET button
To activate the setting with OSD menu.
AUTO ADJUST button
Note: For the VGA input only.
To execute the AUTO ADJUST function.
EXIT button
To turn to the previous OSD menu.
MUTE button
To turn the mute function on/off.
VOL UP button
To increase the audio output level.
VOL DOWN button
To decrease the audio output level.
Package Contents
1. LCD display
2. Remote control with batteries
3. CD-ROM (EDFU and SICP)
4. Quick Start Guide
5. Cable retainer (x 3)
6. Power cord
7. VGA cable
8. BNC-to-RCA adapter (x 3)
9. Main power switch cover
10. Corner alignment bracket and screws
BDL5587XL LCD
5
Advertisement
Table of Contents
