Table of Contents
Advertisement
14
BDL5587XL LCD
Keyboard control
Choose to enable or disable the function of the keyboard (control buttons)
on the display. Use the UP/DOWN button to toggle between
• Lock - Disable the keyboard.
• Unlock - Enable the keyboard.
Tiling
Note: This function is not available when PIP is turned on. Disable PIP to
make Tiling accessible from the OSD menu.
With this function you can create a single large screen matrix (display
wall) that consists of up to 150 BDL5587XL displays (10 units on the
vertical side and 15 units on the horizontal side). This requires you to
connect each BDL5587XL unit in a daisy-chain configuration.
• H monitors - Select the number of displays on the horizontal side.
• V monitors - Select the number of displays on the vertical side.
• Position - Select the position of this display in the screen matrix.
Position is defined by the total number of displays in the video wall
counting from the top, left hand display and counting horizontally. The
number is then continued on the next row down, and the procedure is
continued until the final display is reached. See examples above for
further explanation.
• Frame comp. - Choose to turn frame compensation on or off. If turned
on, the display will adjust the image to compensate for the width of the
bezels in order to accurately display the image.
‧
Enable: Choose to enable or disable the Tiling function. If enabled, the
display will apply the settings in H monitors, V monitors, Position, and
Frame comp..
Note: PIP function is disabled when Tiling is enabled.
• Switch on delay: Choose to enable or disable a sequence in turning
on the screen matrix. If enabled, the display will turn on one horizontal
matrix at a time starting from the top row.
Heat status This function allows you to check the thermal status of the
display at any time. The accuracy of the temperature indicated is 5
degrees Celsius. Press the PLUS button to view the heat status. Press
the EXIT button to return to the previous menu.
Date and time
Adjusts current date and time for the display's internal clock. Press the
UP/DOWN button to toggle between the Year, Month, Day, Hour,
Minute, and Daylight saving time settings, and then press the
PLUS/MINUS button to adjust.
SCHEDULE
Note: Please set up current date and time in Date and time before using
the Schedule function
This function allows you to program up to seven different scheduled time
intervals for the display. You can select the time the unit turns on and
turns off, the days in a week it is activated, and which input source the
display will use for each scheduled activation period. For example, if you
wish to turn the display on automatically at 7:30 AM and off at 10:30 PM
on Tuesdays and Wednesdays and display the signal from the HDMI
input:
On-Screen Display
Perform the following steps:
1. With the Schedule item highlighted in the Advanced option
menu, press the PLUS button to open the submenu.
2. Press the UP/DOWN button to select schedule item #1 (
then press SET. A check mark will appear in the box indicating
that the schedule item has been selected.
3. With the On item highlighted, press the SET button and then
press the UP/DOWN button to set the power on hour to "07".
4. Press the PLUS button to move to the minute slot. Press the
UP/DOWN button to set the power on minute to "30", then press
the EXIT button.
5. Press the PLUS button to highlight the Off item. Press the SET
button, and then press the UP/DOWN button to set the power off
hour to "22".
6. Press the PLUS button to move to the minute slot. Press the
UP/DOWN button to set the power off minute to "30", then press
the EXIT button.
7. Press the PLUS button to highlight the Input item, and then
press the UP/DOWN button to select HDMI.
8. Press the PLUS button to select
SET button. A check mark will appear in the box indicating that it
has been selected.
9. Press the PLUS button to select
SET button. A check mark will appear in the box indicating that it
has been selected.
10. Now you have completed the schedule settings. The on-screen
display should look like the illustration below:
1),
Tue and then press the
Wed and then press the
Advertisement
Table of Contents
