Toro TRX-250 Operator's Manual page 32

Figure 41
6. Dispose of the used oil at a recycling center.
Servicing the Spark Plug(s)
Service Interval: Every 100 hours/Yearly
Every 200 hours/Every 2 years (whichever
comes first)—For Toro engines—replace the
spark plug(s).
Ensure that the air gap between the center and side
electrodes is correct before installing the spark plug.
Use a spark plug wrench for removing and installing
the spark plug and a gapping tool or feeler gauge to
check and adjust the air gap. Install a new spark plug
if necessary.
Type: Champion
Air gap: 0.75 mm (0.03 inch)
Removing the Spark Plug(s)
g193530
1. Park the machine on a level surface, engage
the parking brake (if applicable), and lower the
boom.
2. Shut off the engine and remove the key.
3. Locate and remove the spark plug(s) as shown
in Figure
32
(whichever comes first)—For
Toro engines—check the spark
plug(s).
® RN9YC or NGK ® BPR6ES
42.
Figure 42
g252453
g027478