Factory Setting - TechniSat DIGITRADIO 2 Instruction Manual

12.4 Factory setting

If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
factory settings to delete all the saved stations and then launch a new scan.
> Hold down the MENU button and use the < or > buttons to select the [Factory
settings] item. Press the OK button.
> Using the < or > buttons, select the [Yes] item to reset to the factory setting and
press the OK button.
All previously stored stations and settings will now be deleted. The device is now
in the same status as when delivered.
> The display will show [Restart ...] and the device will start with the language
selection [Language]. Select one of the available languages using the < or >
buttons and confirm the selection by pressing the OK button. Subsequently, the
device performs a channel search in DAB+ mode. While scanning, the display
information shows the progress as well as the number of digital radio stations
detected. After completing the station scan the first DAB+ channel is played.
132