Manual Station Scan; Scan Setting - TechniSat DIGITRADIO 2 Instruction Manual

Please use the manual station scan for setting weaker stations.

8.4 Manual station scan

> Briefly press the < or > buttons repeatedly to set the desired stations or
frequency.
The display shows the frequency in increments of 0.05 MHz.

8.5 Scan setting

In this menu item it is possible to set the sensitivity of the scan.
> Press the MENU button and use the < or > buttons to select the [Search
settings] item, then press the OK button.
> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak signal)
[All Stations].
With the All Stations setting the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise.
118