Table of Contents
Advertisement
Troubleshooting
No power
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is securely connected to the LCD dislay.
• Plug another electrical device (like a radio) into the power outlet to verify that
the outlet is supplying proper voltage.
Power is ON but no screen image
• Make sure the video cable supplied with the LCD dislay is tightly secured to
the video output port on the back of the computer. If the other end of the
video cable is not attached permanently to the LCD dislay, tightly secure it to
the LCD dislay.
• Adjust brightness and contrast.
• If you are using an Macintosh older than G3, you need a Macintosh adapter.
Wrong or abnormal colors
• If any colors (red, green, or blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector
could cause an improper connection.
• Connect the LCD dislay to another computer.
• If you have an older graphics card, contact ViewSonic
adapter.
Control buttons do not work
• Press only one button at a time.
for a non-DDC
®
ViewSonic
VE710b_VE710s
16
Advertisement
Table of Contents
