Advertisement
Single LED Fixture Hardwire Installation
8
Wire Power Supply to the Fixture
Feed the supply wire through the Clamp Connector (HH) and
knockout hole and make all connections using the wire nuts
provided. Connect the 120V line (black) wire to the black wire.
Connect the neutral (white) wire to the white wire. Connect the
ground (green) wire to the green wire.
Green
x
9
Replace the Wiring Bracket
After connecting the wires correctly, place the wires inside the fixture
and reinsert the bracket, sliding it over and screwing it secure.
3
2
EE
Fig. 1
Black
White
HH
1 1
HH
X
X
(continued)
10
Secure Supply Wires with the Clamp Connector
Secure the supply wire by firmly screwing the clamp connectors
down on the wire.
x
11
Installing LED Fixture
Align holes on the back of the fixture to the heads of the
Mounting Screws. Slide fixture towards the mounting slot. If the
fixture is not snug, remove the fixture and readjust the screws.
12
Linking LED Fixtures
Connect the LED Fixtures (AA) using the provided
Connector Cable (BB).
AA
NOTE:
To install 2 or more LED fixtures, repeat the single
fixture installation instructions with two or more units.
5
Please contact 1-866-326-BULB (2852) for further assistance.
BB
WWW.FEIT.COM
Advertisement
