Revision History; Trademark Information; Disclaimer Of Liability - ADC PowerWorx Power Distribution Products User Manual

ADCP-80-526 • Issue 6 • December 2006 • Preface
COPYRIGHT
© 2006, ADC Telecommunications, Inc.
All Rights Reserved
Printed in the U.S.A.

REVISION HISTORY

ISSUE
1 12/1999
2 02/2001
3 07/2003
4 07/2004
5 06/2006
6 12/2006

TRADEMARK INFORMATION

PowerWorx is a registered trademark of ADC Telecommunications, Inc.
ADC is a trademark of ADC Telecommunications, Inc.

DISCLAIMER OF LIABILITY

Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. In no
event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits and ADC further
disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of
liability applies to all products, publications and services during and after the warranty period.
This publication may be verified at any time by contacting ADC's Technical Assistance Center at 1-800-366-3891, extension 73475
(in U.S.A. or Canada) or 952-917-3475 (outside U.S.A. and Canada), or by e-mail to connectivity_tac@adc.com.
ADC Telecommunications, Inc.
P.O. Box 1101, Minneapolis, Minnesota 55440-1101
In U.S.A. and Canada: 1-800-366-3891
Outside U.S.A. and Canada: (952) 938-8080
Fax: (952) 917-1717
Page ii
DATE REASON FOR CHANGE
Original.
Changed cable management bar, updated cooling and temperature requirements.
Updated for new two-hole compression lugs and plastic covers.
Added warning statement saying use of one bus only of dual bus panel results in false alarms.
Removde references to TPM fuses. Added Appendix A ampacity guidelines.
Added KLM warning statement; change bus diagram to dual bus; other small changes.