Hyundai HYPT5200X Instruction Manual page 8

Press the fuel pump (primer) 6x
Mixing ratio: 40 parts petrol to 1 part oil
Semi-synthetic 2-stroke oil and unleaded petrol
at 40:1 ratio
Semi-synthetic 2-stroke oil and unleaded petrol
at 40:1 ratio
Risk of fatal electrical shock! Keep at least 10 m away from
overhead power lines!
Attention! Falling objects .
Especially when cutting above head height .
Attention! Risk of injury due to running blades!
Keep a safe distance away!
General warning!
1 . Push the pin on the front boom into the groove on the
engine unit boom as far as the stop .
2 . Once it is correctly inserted, the red line must match up
with the one on the engine unit boom .
3 . If this is not possible, pull on the starter pull cord to adjust
the shaft .
ATTENTION! The On/Off switch
Protect the appliance from rain and moisture!
min
-1
Max . 9000 min (rpm)
-1
max. 9000
Attention! Left-hand thread .
Beware of flung objects!
Beware of kickback!
Caution! Risk of injury from rotating cutting blade!
Keep hands and feet away!
Attention – petrol is highly flammable!
Explosion hazard! Do not spill fuel!
Turn the appliance off and disconnect the spark plug before
performing any maintenance work!
20 h
must be set to "0" .
Attention! Risk of suffocation!
Caution! Poisonous CO vapours (carbon monoxide vapours)!
Do not use the appliance in confined spaces!
Warning! Do not use circular saw blades for the cutting
blade function .
Add a little grease after every 20 hours of operation
(gear grease)
A distance of 15 metres must be maintained between the
machine and third parties!
The cutting tool continues running after it is turned off
(cutting blade/cutting filament)!
Sound power level LWA data in dB .
Fire, naked flames and smoking are prohibited!
5 ■