Operational Safety Instructions For Cutting Blades; Safety Devices/Equipment - Hyundai HYPT5200X Instruction Manual

Operational safety instructions for cutting blades

Preparation
■ The cutting blade flings objects and soil with great force . These can
blind or cause other injuries . Wear eye, face and leg protection .
Always remove objects from the work area before using the cutting blade .
■ The cutting blade continues running after the throttle lever has been
released . A running-down cutting blade can inflict cuts to yourself or
other people standing nearby . Turn the engine off and make sure that
the cutting blade has come to a complete stop before performing any
work on the cutting blade .
Personal safety
■ The appliance can blind and cause injuries to bystanders . Maintain a
minimum distance of 15 metres in all directions between the appliance
and other people or animals .
Use and handling
■ Do not use the appliance if any of the cutting blade accessories have
not been properly installed .
■ The cutting blade can kick back from objects with force . This can cause
injuries to your arms and legs . If the appliance comes into contact with
a foreign body, immediately shut down the engine and wait until the
cutting blade has come to a complete stop . Check the cutting blade for
damage . Always replace the cutting blade if it is bent or cracked .

Safety devices/equipment

The relevant plastic protective guard for the cutting blade or filament
operation must be installed when working with the appliance in order to
prevent objects from being flung away .
WArnInG!
■ Never mow/trim while other individuals, especially children or
animals, are in the vicinity .
■ Maintain a safety distance of 15 m . Turn off the appliance immedi-
ately if this distance is not maintained .
CAUTIOn! rISK OF POISOnInG!
■ Exhaust gases, fuels and lubricants are toxic . Exhaust gases must
never be inhaled .
WArnInG!
■ Petrol is highly flammable . Store petrol only in the containers
provided .
■ Refuel only outdoors and do not smoke .
■ The filler cap must not be opened and refuelling must not take place
while the engine is running or when the appliance is hot .
■ Do not attempt to start the engine if the petrol has overflowed . In-
stead, remove the appliance from the area polluted by petrol . Do not
attempt to restart the appliance until the petrol fumes have dissipated .
■ For safety reasons, the petrol tank and filler cap must be replaced if
they are damaged .
limit the noise generation and vibrations to a minimum!
■ Only use appliances that are in good condition .
■ Maintain and clean the appliance on a regular basis .
■ Adapt your working method to the appliance .
■ Do not force the power tool .
■ Have the appliance inspected if necessary .
■ Switch the appliance off when not in use .
■ Wear protective gloves .
9 ■