Carson HELPINGHANDS GN-88 Instructions For Use

2x led lighted soldering and craft magnifier

HELPINGHANDS

2x LED LIGHTED SOLDERING AND CRAFT MAGNIFIER

Instructions for use:

Installing Batteries

Pull open battery door (Fig. 1). Insert 2 AA batteries as shown in Fig. 2. Make sure to follow polarity indicators

marked inside battery compartment. Replace battery door (Fig. 3).

Fig. 1

Warning: Use only alkaline batteries. Mixing old and new, different brands or types within brands may cause

batteries to leak, overheat or explode. Keep away from fire or excessive heat. Inspect batteries for corrosion or

leakage. Insert in direction indicated. Rechargeable batteries not recommended.

Locate flexible metal arms and remove nuts from ends (Fig. 4). Insert ends of metal arms into holes in U shaped

base (Fig. 5-6). Reattach nuts to secure arms to base (Fig. 7).

Fig. 4

Fig. 2

Fig. 5

Fig. 6

Fig. 3

Fig. 7

GN-88

Table of Contents

Do you have a question about the HELPINGHANDS GN-88 and is the answer not in the manual?

Page 1 GN-88 HELPINGHANDS 2x LED LIGHTED SOLDERING AND CRAFT MAGNIFIER Instructions for use: Installing Batteries Pull open battery door (Fig. 1). Insert 2 AA batteries as shown in Fig. 2. Make sure to follow polarity indicators marked inside battery compartment. Replace battery door (Fig. 3). Fig.
Page 2 To Use Hands-Free Snap adapter into base. Please note that adapter is "keyed" to fit only one way (Fig. 8). Place magnifier handle into adapter (Fig. 9). It is also keyed and will easily "click-lock" into base when correctly inserted. Adjust flexible arms and position lens as needed (Fig.
Page 3 If you experience any difficulties, please contact us and we will be happy to help you. In the E.U. In the U.K. In the U.S.A. Phone: +44 (0) 1938 557440 Phone: 1-631-963-5000 Phone: +44 (0) 1938 557440 Email: eusupport@carson.com Email: uksupport@carson.com Email: info@carson.com For warranty information, visit www.carson.com/warranty GN-88 / © 2020...