Carson ATTACH-A-MAG AM-20 Instructions For Use

ATTACH-A-MAG
FLEXIBLE CLAMP-ON LED LIGHTED MAGNIFIER
Instructions for use:

To Activate LED Light

To turn light on, slide switch on top of LED housing unit up (Fig. 1).
Note: Please remove battery tab before first use.

To Attach to Table

Squeeze to open base clamp (Fig. 2). Clamp onto table edge as shown (Fig. 3).
Fig. 2

Position Magnifier Lens

Bend and twist flexible arm to position lens as needed (Fig. 4). If flexible arm is too loose or too tight it can
be adjusted. Use a phillips head screw driver to loosen or tighten screws along flexible arm to adjust tension
(Fig. 5). If desired, segments of flexible arm can be removed by loosening screws and pulling segments
apart (Fig. 6). Attach remaining segments and tighten to secure.
Fig. 4
TM
Fig. 1
Fig. 5
AM-20
Fig. 3
Fig. 6