Carson MagniFlexPro CP-90 Quick Start Manual

MagniFlexPro
2x Power 4" LED Lighted Gooseneck Flexible
Magnifier with 4x Spot Lens and Magnetic Base
Congratulations on selecting your new MagniFlex Pro! In order to
achieve optimum performance, please follow instructions for
proper use and care.

PRODUCT SPECIFICATION:

Magnification: 2x/4x Spot
Batteries: 4 AA (not included)
5.32 lbs
Weight:
Dimensions: 14.2 x 5.3 x 18.9"
Lens Diameter:
101mm (4")
Accessory: AC Adapter

TO CHANGE BATTERIES:

1. Remove battery door.
Then remove battery
case from compartment.
2. Replace exhausted
batteries with 4 fresh
AA 1.5V batteries
according to polarity
indicators printed
inside case.

INSTRUCTIONS FOR USE:

1. Place metal on stable,
flat surface.
2. Attach magnifier to
metal plate in desired
position using built-in
magnet located in
magnifier base.
TM

BATTERY WARNING:

Use only alkaline batteries. Mixing old and new, different brands or types
within brands may cause batteries to leak, overheat or explode. Keep away
from fire or excessive heat. Inspect batteries for corrosion or leakage. Insert
in direction indicated. Rechargeable batteries not recommended.
3. Place loaded battery case into
battery compartment with
metal contacts facing upwards
and towards the inside of the
battery compartment.
4. Replace battery door.
3. To use with table clamp, place open c-clamp onto a
table or hard surface and tighten securely by handle.
Then place magnifier on top of clamp using
built-in magnet located in magnifier base.
CP-90
1