Caring For Your Monitor; Detaching The Monitor Stand; Wall Mounting (Optional) - Lenovo Y25-25 User Manual

Caring for your monitor

Detaching the monitor stand

Wall Mounting (Optional)

Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
Apply water or liquid directly to your monitor.
●
Use solvents or abrasives.
●
Use flammable cleaning materials to clean your monitor or any other electrical
●
equipment.
Touch the screen area of your monitor with sharp or abrasive items. This
●
type of contact may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This
●
may harm the coating of the screen area.
Do:
Lightly dampen a soft cloth with water and use this to gently wipe the covers and
●
the screen.
Remove grease or finger marks with a damp cloth and a little mild detergent.
●
After placing the monitor face down on a clean and soft surface, push the hook of the stand and lift the
stand up to remove it from the monitor .
Refer to the instructions that come with the base mounting kit. To convert your LCD display from a
desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned off, and then disconnect the power cord.
Step 2: Lay the LCD display face down on a towel or blanket.
Step 3: Remove the base from the monitor, refer to "Detaching the monitor base and stand".
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm
distance), VESA Mounting Screw M4 x 10 mm.
Step 5: Attach the LCD display to the wall, following the instructions in the wall-mounting kit. For use
only with UL&GS Listed Wall Mount Bracket with minimum weight/load: 8kg
Chapter 2. 2-13