Table of Contents
Advertisement
F. RESET INSTRUCTIONS
1. Unplug the heater then turn your Fan Heater "OFF - 0" and wait 20 minutes for the
unit to cool down.
2. Check that there are no objects around the unit, which may have caused it to
overheat.
3. After 20 minutes, plug the unit in again and operate normally.
4. If the unit overheats again, unplug and return to your retailer or a qualified service
engineer for inspection and repair.
TIPOVER SWITCH: YOUR HEATER HAS A SAFTEY TIPOVER
SWITCH AND IF KNOCKED OVER THE HEATER WILL STOP
OPERATING, UNTIL IT IS PLACED IN THE UPTIGHT POSITION.
G. MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD FROM THE POWER OUTLET BEFORE
CLEANING. DO NOT IMMERSE HEATER IN WATER.
Clean the heater body with a soft cloth only.
CAUTION: Do not use Petrol, thinner, harsh cleaners, etc., as they will damage the
heater. NEVER USE ALCOHOL OR SOLVENTS.
Please note
Do not attempt to take heater apart. This will void your warranty.
H. STORAGE
Store the heater with these instructions in the original carton in a cool, dry place.
I. SPECIFICATION
Power:
3kW Max
Voltage:
220-240V ~ 50Hz
N.W.
4.5kg
G.W.
5.2kg
IPX2
Advertisement
Table of Contents
