Related Manuals for Prem-I-Air PFH550
Summary of Contents for Prem-I-Air PFH550
- Page 1 3kW Turbo Fan Heater Model: PFH550 PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT...
-
Page 2: Important Safety Instructions
A. IMPORTANT SAFETY INSTRUCTIONS WARNING - This appliance is intended for use in a domestic environment only. Any other use is not recommended by the manufacturer and may cause fire, electrical shocks or other injury to person or property. When using electrical appliances, basic safety precautions should always be followed: 1. - Page 3 18. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 19.
-
Page 4: Bs Plug Wiring
B. BS PLUG WIRING Wiring Instructions: Should it be necessary to change the plug please note the wires in the mains lead are coloured in accordance with the following code: BLUE or BLACK - NEUTRAL BROWN - LIVE GREEN AND YELLOW - EARTH As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. -
Page 5: Parts Description
C. PARTS DESCRIPTION Air outlet grille (vent) Low thermostat setting Adjustable thermostat High thermostat setting Power on indicator light Fan setting Control switch (Off / Fan / Heat) Heat setting (3kW) Air inlet grille (vent) ** Tip-over safety cut-off and Overheat safety cut-off switches are built inside the unit. -
Page 6: Operating Intructions
D. OPERATING INTRUCTIONS Check the household voltage to ensure it matches the appliance's rated specification. The control switch (4) and the thermostat knob (2) enable you to select the following functions: Control switch(4) : = “OFF”. Both the fan and the two heating elements are switched off. = “Cool air”. -
Page 7: Maintenance
F. RESET INSTRUCTIONS 1. Unplug the heater then turn your Fan Heater "OFF - 0" and wait 20 minutes for the unit to cool down. 2. Check that there are no objects around the unit, which may have caused it to overheat. -
Page 8: Service And Warranty
J. SERVICE & WARRANTY Do not operate the unit with a damaged cord or plug, after the unit malfunctions, or has been dropped or damaged. Return the product to an authorised service facility for examination and repair to avoid a hazard. For your convenience record the complete model number and product name (located on the Product Identification Plate), the date you purchased the product and your purchase receipt as proof of purchase.