Additional Information - D-Link DSS-100E-18P Quick Installation Manual

Switch to End Node or Powered Device
Use a standard Ethernet cable to connect the switch
to PCs with an 10/100/1000 Mbps RJ-45 interface,
or connect and power remote IEEE 802.3af/at-
compliant devices, such as IP cameras or IP phones
using PoE.
Switch to Hub or Switch
Connect the switch to another switch or hub using
the RJ-45 or SFP uplink ports.
Switch to Server
Connect the switch to a network backbone or
network server using the RJ-45 or SFP uplink ports.

Additional Information

For additional support, please refer to the user
manual, or visit http://support.dlink.com/ which
will direct you to your local D-Link support website.