Remote Controller Installation - LG ABNQ18GM1T0 Installation Manual

INSTALLATION INSTRUCTION
16

Remote controller installation

Since the room temperature sensor is in the remote controller, the remote controller box should
be installed in a place away from direct sunlight, high humidity and direct supply of cold air to
maintain proper space temperature. Install the remote controller about 5 ft(1.5 m) above the floor
in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by:
- Drafts, or dead spots behind doors and in corners.
- Hot or cold air from ducts.
- Radiant heat from sun or appliances.
- Concealed pipes and chimneys.
- Uncontrolled areas such as an outside wall behind the remote controller.
- This remote controller is equipped with LCD. display. For proper display of the remote controller
LCD's, the remote controller should be installed properly as shown in Fig.1.
(The standard height is 4~5 ft (1.2~1.5 m) from floor level.)
FAN
SPEED
TEMP
OPER
MODE
no
Direct
Sun ray contact area
yes
FAN
SPEED
TEMP
OPER
MODE
no
FAN
SPEED
TEMP
OPER
MODE
5 ft
(1.5 m)
(Fig. 1)
FAN
SPEED
TEMP
OPER
MODE
no