Download  Print this page

Get Started; Charge The Built-In Battery - Philips TAS2505 User Manual

Hide thumbs

Advertisement

3 Get started

Always follow the instructions in this chapter in
sequence.

Charge the built-in battery

The speaker is powered by a built-in
rechargeable battery.
Note
·
Before use, fully charge the built-in battery.
·
The USB-C socket is for charging only.
·
It takes you approximately two and a half hours to fully
charge the battery.
·
Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Connect the USB-C socket on the speaker to
an outlet (5V
1A) by using the provided USB
cable.
5V
1A
EN
4
Power on
When the speaker is being charged,
LED is solid Red.
When the speaker is fully charged,
LED is solid Blue.
Power o
When the speaker is being charged,
LED is solid Red.
When the speaker is fully charged,
LED is o .
Caution
• Risk of speaker damage! Make sure the power
supply voltage corresponds to the voltage
printed on the back or the underside of the
speaker.
• Risk of electric shock! When unplug the USB
cable, always pull the plug from the socket.
Never pull the cable.
• Use only a USB cable specified by the
manufacturer or sold with this speaker.
Turn on/off
To turn the speaker on, press and hold
"
" for two seconds. You will hear the
prompt sound and Blue LED indicator
blinks.
To turn the speaker off, press and hold "
for two seconds. You will hear the prompt
sound and and the LED is off.
Auto off in 15 minutes if no Bluetooth
connection.
"

Advertisement

loading