Related Manuals for impekk EVOK 150H
Summary of Contents for impekk EVOK 150H
- Page 1 INSTALLATION INSTRUCTIONS - HORIZONTAL WALL BED KIT SAFETY WARNING - REVIEW INSTRUCTIONS COMPLETELY PRIOR TO ASSEMBLY 1855 Hymus Montréal, QC H9P 1J8 | T: 514.685.2707 | T: 800.363.4979 | F: 514.685.5920...
-
Page 2: Safety Warnings
SAFETY WARNINGS This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the EVOK 150 Horizontal Wall Bed Kit: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP THESE INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE. - Page 3 HARDWARE S = Single D = Double PLEASE ENSURE YOU HAVE LOCATED ALL HARDWARE PRIOR TO STARTING Q = Queen Quantity for: Head bar of the frame Pistons Foot bar of frame Mounting plates (left & right) Center frame Supports Center frame Support with slat holes Door brackets Long Center Frame Support...
- Page 4 HARDWARE (cont.) S = Single D = Double PLEASE ENSURE YOU HAVE LOCATED ALL HARDWARE PRIOR TO STARTING Q = Queen Quantity for: #8 x 15mm screws #12 x 3/4" washer head screw 1/4 X 3" washer head lag screw M5 x 15mm screws M6 x 30mm bolts M8 x 50mm bolts...
- Page 5 HORIZONTAL WALL BED CABINET COMPONENTS-TABLES Single A= Exterior Double The respect of the internal B-C-D = Inset C C C C dimensions is crucial to safety Queen C C C C Inside Measurements Width Depth Height Single 1985 78 1/8 14 1/2 1019 40 1/8...
- Page 6 DRILLING GUIDE The holes should be 3/8” (9mm) in diameter and 1/2” (13mm) deep for the threaded inserts. Front Back 176mm 6 15 " Do not install this bracket with wood screws. It is important to install all provided inserts as well as using the correct bit size for the hole.
-
Page 7: Installing The Mounting Brackets
INSTALLING THE MOUNTING BRACKETS EE = Right Side DD = Wood Left Side DD + EE Bottom Do not install this bracket with wood screws. ASSEMBLING THE CABINET Please use appropriate hardware to assemble these corners according to the * See conversion guide for suggested cabinet dimensions. material used. -
Page 8: Securing To The Wall
SECURING TO THE WALL • Professional installation recommended • Cabinet needs to be secured to at least 2 wood studs. (3 studs for queen size) • Do NOT use any sort of wall anchors • Each Wall Bracket (F) must be mounted flush on the cabinet top and flush to the wall with no gap. -
Page 9: Assembling The Frame
ASSEMBLING THE FRAME Insert GG into A & C (follow diagram in the x 32 middle), then connect it together with K. Tabs should be flat on ground IMPORTANT, do not FULLY tighten all fasteners on the bed frame until you have completed step 4.4 Attach H to the structure you just created. - Page 10 Place F on the inside of your structure then attach F to H and also to K. Tabs should be flat on ground Bolt E to the structure you have built.
- Page 11 INSTALLING THE SLATS S & D Place N2 on one end of each slat N1. Attach two slats together with N3. Insert N2 and N3 into their designated holes along the frame. *If necessary, use a rubber mallet to secure the slats into the frame. For each bed size, DO NOT insert the rows of slats on the first and last row.
- Page 12 ATTACHING THE PISTONS TO THE FRAME Secure the longer metal ends of the pistons to the frame. This end INSTALLING THE FRAME ONTO THE MOUNTING BRACKETS Cabinet MUST be secured to the wall into at least 2 wood studs before this step. (3 wood studs for the queen size...
- Page 13 INSTALLING THE PISTONS TO THE CABINET Tilt the frame inside past the edge of the cabinet to install the pistons on the mounting brackets. This will not operate properly without the weight of the mattress and panels For this step A second person must assist...
-
Page 14: Installing The Legs
INSTALLING THE LEGS The pistons are now installed, therefore do NOT operate the bed without the help of another person. Do NOT let go of the mechanism. Install the temporary stoppers onto the top corners of the bed cabinet. Do not overtighten. Secure the legs to the bed frame. - Page 15 INSTALLING THE DOOR BRACKETS 4 doors The door brackets must point downward. Install the door brackets in alignment with the support bars on the bed frame. 7/16” 7/16” 6” Measurements (right) are for the placement of this hole along the doors 1/4”...
- Page 16 11.2 For this step x 24 Attach the doors to the frame while putting weight on the frame to keep the bed open. Please have someone else sit on the frame during this step. x 24...
- Page 17 INSTALLING THE STOPPER Permanent stopper Install the stopper (not included) on the inside top of the cabinet where it will allow for the door to close flush to the front of the cabinet. INSTALLING THE MATTRESS SUPPORT Insert the mattress supports into the designated holes on the bed frame.
- Page 18 ** The bed and panels will not stay open on its own without the weight of a mattress and panels. Bed Size Dynamic Load Rating Static Load Rating SINGLE 300 lbs (136 kg) DOUBLE 340 lbs (154 kg) 1000 lbs (454 kg) QUEEN 400 lbs (181 kg) FOR MORE INFORMATION 514.685.2707 | 800.363.4979 | www. impekk.com V1-20170213...