Lock Function - Myenergi ZAPPI Series Operation & Installation Manual

Lock Function

zappi can be locked from unauthorised operation. The Lock Function requires a PIN number to be entered before
the unit can be operated.
The lock can be set to be active
Only when the EV is plugged in.
–
Only when the EV is unplugged.
–
All the time.
–
The settings for the Lock Function can be found in the Other Settings/Lock Function menu option.
Lock Func on Se ng
EV plugged
EV unplugged
Timeout
Lock Code
Auto Hide
Note: To set the lock so that it is always active make sure that both the 'EV plugged' and 'EV unplugged' options are
both set to ON.
Socket Lock
For untethered units only, the EV cable will be locked automatically when it is inserted into the zappi, even if it is not
plugged into the EV. A small 'lock' icon will be seen on the right side of the zappi, in the centre of the screen. When
the EV is disconnected, a press of the
cable to be removed from zappi. After this time, the lock will be re-activated.
If the 'Lock Function' (PIN lock) feature is enabled in the zappi, the cable will be not locked into the socket until the
PIN is entered and EV charging starts. This means that if anyone plugs their cable into the zappi but they do not
know the PIN they are able to remove their cable.
In all cases the cable is unlocked if zappi detects a fault or the power supply to the zappi is switched off.
operation and installation manual
Descrip on
The Lock Function is active when the EV is plugged in, preventing tampering with
the charge session or changing any settings
The Lock Function is active when the EV is disconnected, preventing unauthorised
charging
The time before the Lock Function automatically reactivates after being unlocked
This is the current lock code and is five digits from (1 to 4), it can be changed here
Default code : 44444
If set, this will hide the main display of the zappi to keep the power readings private
button, will unlock the cable for a duration of 5 seconds, allowing the
Operation
15
zappi