Specifications
Type:
RC system:
Output power:
Frequency Bands:
Antenna:
Holding style:
Default stick mode:
Display:
Models:
Battery:
Runtime:
Channels:
Operating range:
Gimbals
Controls:
Ports:
Neck-strap mounting:
Speaker:
Simulator compatibility:
Working temperature:
Size:
Weight:
Kit contents:
All-in-one (AIO) integrated radio
Built-in TBS CROSSFIRE MicroTX
25mW to 250mW
868MHz (EU, Russia), 915MHz (USA, Asia, Australia)
Standard full-size TX antenna
Switchable antenna polarization - horizontal / vertical
Optional external SMA port
Pinch, thumb, and hybrid friendly
Mode 2, throttle and yaw left (user-changeable)
High-resolution 1.2" OLED-panel, 128 x 96 pixels
Standard and Pro model. PRO model has folding gimbals
Lithium-polymer 3.7V 5000mAh internal battery pack, USB-C charging
Approx. 8 hours
8- or 12-channels (CROSSFIRE)
Variable depending on output power and radio environment
Full-size hall sensor gimbals, Adjustable vertical range, Adjustable spring
tension, Foldable sticks (PRO version only), m3 threading
2x Quad full-size hall gimbals
2x Two-position switches
2x Three-position switches
2x Lower-shoulder momentary buttons
3x Configuration buttons
1x Rocker switch
1x Power-on button
3.5mm headphone audio-jack for OpenTX voice support
USB-C for software updates and charging
Screw on mount - sold separately
1W, for OpenTx voice support
Yes, over USB-C
0 - 40
C
°
W 157 x L130 x H70 mm (H50 mm folded)
345 grams
1x TBS TANGO 2 Radio Controller, 1x SD-card pre-setup
5
Need help?
Do you have a question about the TBS TANGO 2 and is the answer not in the manual?
Questions and answers