Table of Contents
Advertisement
Quick Links
globalindustrial.ca
Distribucion Industrial Globales S DE RL DE CF
Instruction Manual
Manual de Instrucciones
Manuel d'instruction
Customer Service
Servicio de atención al Cliente
Service à la clientèle
México: 01.800.681.6940
Canada: 888-645-2986
US: 1-800-645-2986
Outdoor Drinking Fountain w/ Bottle Filling Station
WARNING
• All installation work must be performed by authorized
service personnel.
• Two or more people are recommended to lift and
install the unit.
• To avoid the risk of property damage and/or personal
injury, ensure the mounting surface is adequate to support
400 lbs.
• Check local codes for plumbing requirements prior
to installation.
• Refer to Rough-In Guide (page 4) prior to installation.
• Thoroughly flush all water supply lines of all foreign
matter before connecting to the fixture.
• Check for any leaks before use.
• DO NOT attempt to repair or replace any part of this
fountain unless it is specifically recommended in this
manual. All other services should be referred to a
qualified technician.
• For use with clean, clear potable drinking water only.
• Shut-off water supply during installation to reduce the
risk of water damage.
• Freezing Caution: Before freezing temperatures occur,
refer to the Draining and Winterization section of this
manual (page 11) for proper preparation.
• Installation of a trap on the water drain line may be
Models 761216, 761216BK,
necessary; remove trap before winterization draining.
761216BL & 761216GN
• Failure to follow safety warnings and/or
installation instructions will void warranty.
Note: This unit is designed to be installed on the surface of an existing or new concrete slab.
Included are the necessary vandal-resistant stainless steel bolts and washers needed
to anchor this unit. Installer must provide a 1-1/2" PVC drain line (if applicable) and water supply
line. All connections are made inside the item through the access doors, as shown in the drawings.
It is recommended to install a shut-off valve (not included) on the water supply.
1
Advertisement
Table of Contents
Related Manuals for Global 761216
Summary of Contents for Global 761216
- Page 1 Draining and Winterization section of this manual (page 11) for proper preparation. • Installation of a trap on the water drain line may be Models 761216, 761216BK, necessary; remove trap before winterization draining. 761216BL & 761216GN • Failure to follow safety warnings and/or installation instructions will void warranty.
- Page 2 Instruction Manual Outdoor Drinking Fountain w/ Bottle Filler BOTTLE FILLER SPOUT DRAIN PAN PEDESTAL PEDESTAL ARM BUBBLER DRAIN PUSH BUTTON DRINKING FOUNTAIN BASE COLOR OPTIONS: SS316 SS316 GREEN SS316 BLACK SS316 BLUE WWW.GLOBALINDUSTRIAL.COM BOTTLE FILLER PEDESTAL HARDWARE BAG...
-
Page 3: Specifications
Instruction Manual Outdoor Drinking Fountain w/ Bottle Filler SPECIFICATIONS Features: 316 Stainless, Laminar Flow, Heavy Duty, Vandal Resistant Finish: SS Finish, Black(BK), Blue(BL), Green(GN) Power: No Electrical Required Bubbler Vandal Resistant Activation Type: Push Button Mounting Type: Floor Mount/Free Standing Product Dimensions: 30.8"L x 14.4"W x 60.3"H Weight:... - Page 4 Instruction Manual Outdoor Drinking Fountain w/ Bottle Filler 11 1/2'' 300mm 14'' 355mm...
-
Page 5: Installation
Instruction Manual Outdoor Drinking Fountain w/ Bottle Filler INSTALLATION • It is recommended that 2 or more people install this unit. • This fountain must be mounted on a solid, flat surface with adequate strength (concrete pad recommended) capable of supporting 400 lbs. •... - Page 6 Instruction Manual Outdoor Drinking Fountain w/ Bottle Filler 2. INSTALL BUBBLER 2a. Unscrew and remove 2b. Locate the hole on the drinking 2c. Bubbler is now nut and washers from fountain pan surface. Align and properly installed. Bubbler (P1). sandwich with the two washers and tighten the nut to secure the bubbler.
- Page 7 Instruction Manual Outdoor Drinking Fountain w/ Bottle Filler 5. CONNECT WATER INLET LINES • Install a shut-off valve (not included) on the water supply. • All water connections and drains must comply with local codes. Though the rear access windows, connect water inlet lines as illustrated below: (39-1/2”) Connect Inlet Adapter (P2) to Union T- Connector (P3)
- Page 8 Instruction Manual Outdoor Drinking Fountain w/ Bottle Filler WATER INLET LINE CONNECTION BREAKDOWN: FRONT VIEW SIDE VIEW (25-1/2”) (39-1/2”) (25-1/2”) (6-1/4”) (31-1/2”) Install Shut-off Valve (Not Included) WATER SOURCE P4: Straight Flow Check Valve: All Water Inlet Connec�ons: OPERATION OF QUICK CONNECT FITTINGS 3/8”...
- Page 9 Instruction Manual Outdoor Drinking Fountain w/ Bottle Filler CONNECT WATER DRAIN LINES • All water connections and drains must comply with local codes. • Through the rear access windows, connect water drain lines as illustrated below. NOTE: All drain lines attach with quick connect connections. •...
-
Page 10: Side View
Instruction Manual Outdoor Drinking Fountain w/ Bottle Filler WATER DRAIN LINE CONNECTION BREAKDOWN: FRONT VIEW SIDE VIEW (16-3/4”) (28-1/8”) Confirm with local codes for trap and other drainage requirements Note: Turn on water supply and check all connections for leaks and proper operation. Reinstall all (4) access panels using the (24) M6 x 10 flat-head anti-theft screws preciously removed from the fountain. - Page 11 Instruction Manual Outdoor Drinking Fountain w/ Bottle Filler START-UP Initial water flow may have sputter due to air in the water lines; this will be eliminated once air is purged from all water lines. Press and hold the push button until a steady water stream is achieved.
Need help?
Do you have a question about the 761216 and is the answer not in the manual?
Questions and answers