Table of Contents
Advertisement
DW-EN4K16 Compressor™
4.7
NETWORK
4.7.1
Basic > WAN Port
No.
Name
1
Static IP
2
DHCP
3
MAC Address
4
DNS
5
Port (TCP)
6
Port (Web)
7
Bandwidth Limit You can set a limit to the amount of bandwidth used by the encoder
8
Ping Test
Figure 4-38 NETWORK > Basic > WAN Port
Table 4-37 NETWORK > Basic > WAN Port Item and Description
If you are using a static IP, enter the IP address, Subnet Mask, and
Gateway information. Contact your Network Administrator for more
information.
Select to use DHCP (Dynamic). If selected, the encoder's network
information will be set automatically based on the current network's
settings.
Display the unit's MAC Address.
Enter the DNS manually or set to automatic.
Enter the TCP port (default 9350)
Enter the Web port (default 80).
(no limits, 50Mbps, 10Mbps, 5Mbps, 2Mbps, 1Mbps, 500Kbps,
400Kbps, 300Kbps, 200Kbps, and 100Kbps).
To test your encoder's network settings, enter the unit's IP address in
the Ping field.
Function
[48]
User Manual
Advertisement
Table of Contents
