Operation
6.1 Operation
Retracting the circuit breaker
Risk of injury due to circuit breaker falling
Take suitable precautions to be able to remove the circuit breaker safely.
1. Insert the racking handle, see Section "Inserting and removing the racking handle" above.
2. Move the circuit breaker into the DISCONNECT position.
3. Operate the side locking lever above the racking rail and remove the circuit breaker from
the guide frame.
Removing the racking handle
1. Pull the racking handle out.
2. Fold the handle back into line and return the racking handle to its storage compartment.
160
CAUTION
Air circuit breaker 3WL10
Manual, 11/2017, L1V30499596002-01