Page 1
DF801 Quick Start Guide V1.0 Download APP Important For your safety and to avoid loss of property, please read this manual carefully. ○ Please do not try to disassemble, modify or repair the aircraft, if necessary, please contact the agent. ○...
DF801 1. Remote Controller 1). Console a Antenna b Flight Mode Switch c One Key Return d Mode Indicator e Status Indicator f Left Joystick g Right Joystick h Power i One Key Take Off/Land j Picture/Video k Mobile Phone Bracket l USB Charge Port m Gimbal Adjustment 2).
Page 3
DF801 (4). Self-inspection and frequency match Power on the aircraft, set it aside for 30 seconds for self-inspection. Wait until its indicator light turns from fashing or solid blue to flashing or solid green, indicating the pairing has been successful. Indicator light turns from flashing or solid blue to flashing or solid green.
DF801 (2). Connect with the APP Open your mobile phone, navigate to settings and then the WLAN: When flying with the APP, click the network of "Drone-xxxxxx (serial number)" to connect the drone to the APP. In this situation, the drone has a relatively shorter range. When flying with the controller, click the network of "Controller-xxxxxx (serial number)"...
DF801 ○ Method 2:one key land Long press the “One Key Takeoff/ Landing” button for 2 to 3 seconds. When the remote controller beeps steadily, the aircraft will land vertically. (3). Remote controller instruction ○ Mode 2 Ascend Left Joystick Right Joystick Forward Descend...
DF801 Preparing to fly Position Hold Video Photo Short press the button to take photos and long press to take videos. You can also short press Album it to take a snapshot when a video is running in. ○ Aerial photography tips (1).
DF801 8). Return To Home In GPS positioning mode, you can press the “One Key Return” button to return the aircraft. Do not control any functions during the process of return or ascent. When the aircraft is landing, you can toggle the joystick as to control it to land on your desired location.
Page 8
5) Find “RC Paired” and click “Pair”. 6) A dialogue box will pop up. Type in the serial number of the remoter controller in the box and click “Pair” to confirm. 7) Navigate your mobile phone to “Settings-WLAN” again to check the serial numbers of the drone and the remote controller.